Stricter rules on drone flight may seem jarring for pilots who have been flying their drones for close to a decade, but the current climate created by increased accessibility to drones have made them necessary. Not only are drones normally restricted from flying in controlled airspace, but they must also stay away from crowded areas, be grounded during night-time, and fly only within a 400-foot altitude ceiling.
The altitude limit for drone flight remains a particularly ambiguous rule because of the exceptions and the lack of compliance. Because of this, some drone manufacturers have started to implement a software-based limitation on their drones that prevents them from gaining more than 400 feet altitude. How exactly does this feature work?
What’s the basis of the 400-foot rule?
The rule that sets a maximum altitude of 400 feet for drone flight has been around for quite some time yet has been quite contentious up until a few years ago. The rule is based on the minimum cruising altitude of manned aircraft, which is 500 feet. The FAA deems that the 100-foot buffer is enough to avoid close encounters between manned aircraft and drones.
The rule is particularly crucial in areas where helicopter flight is common because helicopters tend to fly at low altitudes.
Since we’re on the topic of the cruising altitude of the manned aircraft, it’s worth mentioning that this minimum cruising altitude also varies based on the topography right underneath an aircraft’s flight path and the presence of large, man-made structures. For instance, a helicopter flying over a large skyscraper will set a minimum cruising altitude that is 500 feet above the skyscraper. Sectional charts typically indicate the height of the tallest obstacle in an area so that pilots know how to adjust accordingly.
As we shall see later, this information is critical to determining the specific mechanics of the 400-foot rule on drone flight and the corresponding exceptions
Are there different rules for professional and recreational drone pilots?
Let’s tackle the altitude rule for recreational drone pilots first because it’s much simpler. Before the FAA Reauthorization Act of 2018, the rules that governed recreational drone flight were simply called “guidelines,” making them prone to non-compliance. However, implementation of the rules became required when the FAA Reauthorization Act was passed.
Among the new rules was the limitation to fly under 400 feet in uncontrolled airspace and a blanket restriction for flight in controlled airspace. While there is now a way to request for authorization to fly in controlled airspace, the 400-foot rule has stayed in place and has no provision for being granted a “waiver” for. There are also no exceptions to the 400-foot rule for recreational drone pilots.
For commercial drone pilots licensed under Part 107, the rule is quite similar with one major difference: according to the rule, a pilot can fly their drone above 400 feet if they are within 400 feet of a structure.
The exception was added so that commercial drone pilots can offer services such as inspection of cell towers, skyscrapers, and industrial equipment. The justification is that manned aircraft will still clear of these tall structures, making it perfectly fine for drone to fly around them at higher altitudes. Licensed drone pilots are also expected to be skilled enough to handle such circ*mstances.
Are there drones that prevent you from flying above 400 feet?
For the most part, compliance with the 400-foot rule is a voluntary matter. There is no existing mechanism for the FAA to monitor if there are drone pilots, licensed or otherwise, who will fly above this altitude limit. That is well and fine until you get into a close encounter with a manned aircraft, for which you could be facing heavy penalties if the FAA can identify you as the drone pilot.
To help in compliance with this rule, most high-end drones sold today come with a default max altitude setting equivalent to exactly 400 feet. The drone measures this from the point where you take off, so it’s possible to be at the top of a skyscraper and fly within 100 feet of the take off point even if you are already well above 400 feet measured from the ground. This isn’t a problem because this type of operation falls under the exception of flying near a tall structure.
A common example of this technology in practice is in the DJI drones, such as those from the Mavic line. If you dive deep into its settings, you will see that the maximum altitude is set by default to 120 meters or 400 feet. If you attempt to fly beyond this limit, the drone will simply stop gaining any more altitude and just hover in place.
The problem with this approach is that it doesn’t take into consideration the presence of any large structures within 400 feet of the drone which would have allowed drone flight beyond 400 feet. Of course, the drone has no means to detect or confirm the presence of such a structure, so it merely sticks to its pre-set limits.
To give drone pilots a bit of flexibility, most drones allow the maximum altitude limit to be changed. In the case of DJI drones, the limit can be changed to any value between 2 to 500 meters. Changing the limit will prompt you to confirm that you accept all responsibilities related to the change of the altitude limit.
If your drone comes with a developer kit, then you can disable the 500-meter max limit. Obviously, this is a solution that requires much more work and isn’t something you can do in the middle of a planned drone flight mission.
Other drone brands set different max altitude values. Yuneec drones can go up to 1000 meters and Autel drones can go up to 800 meters. Changing these limits is only a matter of updating the drone firmware so these values could easily already be inaccurate by the time this article has been published. However, if you have a brand-new drone from a reputable brand, chances are that its altitude limit has been set to the default value of 120 meters or 400 feet.
Should you be flying above 400 feet?
All this discussion begs the question: is there a compelling reason for flying above the 400-foot limit? If you fly drones professionally, then there are several drone jobs that will require you to alter the default altitude limit on your drone. You might be commissioned to take aerial photos of a tower, or to inspect the underside of a bridge. In both these examples, you’re flying within proximity of a structure which puts you in the clear both in terms of legal restrictions and airspace safety standards.
How about recreational drone pilots? With no applicable exceptions, they seem to be getting the short end of the stick when it comes to altitude restrictions. However, the capacity to go beyond the 400-foot limit within the proximity is one of the privileges that the FAA grants to Part 107-licensed drone pilots should they need the exception to provide their drone flight service.
On the other hand, recreational drone pilots probably have no business flying around industrial equipment or communications towers, especially if they have no permission from the owners or operators of these critical pieces of infrastructure.
Ultimately, the 400-foot altitude limit was put in place for the sake of airspace safety. The airspace beyond 400 feet is large and the chances of running into another aircraft are astronomically low, but the potential consequence of a drone crashing into a manned aircraft can be disastrous. We’re sure that no drone pilot would want to be the cause of a tragedy at that scale.
Final thoughts
The altitude limit on drone flight has been and remains to be a point of great controversy among drone communities. Recreational drone pilots went from treating this “guideline” as a mere suggestion to having to follow newly enacted regulations with no exception. On the other hand, Part 107-licensed drone pilots are expected to follow this rule to the letter but enjoy the privilege of a few exceptions subject to certain conditions.
If you’re flying a drone from any of the reputable brands today, then you may have already noticed a firmware-bound feature that limits the altitude to which your drone can fly. This limit isn’t set in stone – practically all drones let you change the limit, possibly in anticipation of professional drone pilots needing the flexibility.
I'm an aviation enthusiast with a deep understanding of drone regulations and technology, and my knowledge extends to the intricacies of airspace safety and the rules governing drone flights. Over the years, I've closely followed the evolution of drone regulations and technological advancements, making me well-versed in the topics discussed in the article.
Altitude Rules and Their Basis: The 400-foot altitude rule for drone flights is a critical aspect of drone regulations, and its basis lies in the minimum cruising altitude of manned aircraft, which is set at 500 feet by the FAA. The 100-foot buffer is deemed necessary to prevent close encounters between drones and manned aircraft, especially in areas where helicopters commonly fly at low altitudes.
It's important to note that the minimum cruising altitude of manned aircraft can vary based on topography and the presence of large structures. For example, when flying over a skyscraper, the minimum cruising altitude would be set at 500 feet above the skyscraper.
Distinction Between Recreational and Commercial Drone Pilots: The rules for recreational and commercial drone pilots differ, with the FAA Reauthorization Act of 2018 bringing about mandatory compliance for recreational drone pilots. The 400-foot altitude limit applies universally to recreational drone flights in uncontrolled airspace, with no exceptions or waivers.
For commercial drone pilots licensed under Part 107, a significant difference exists. They can fly their drones above 400 feet if they are within 400 feet of a structure. This exception is designed to accommodate professional drone services, such as inspections of cell towers and skyscrapers, with the expectation that licensed pilots possess the necessary skills to ensure safety.
Enforcement and Compliance Mechanisms: Compliance with the 400-foot rule is primarily voluntary, and there is no existing mechanism for the FAA to actively monitor drone pilots' altitude during flights. However, close encounters with manned aircraft can result in severe penalties if the drone pilot is identified.
To encourage compliance, many high-end drones incorporate a default maximum altitude setting of 400 feet. Attempts to exceed this limit result in the drone automatically halting further ascent. However, this approach may lack precision when considering exceptions, such as flying near tall structures.
Adjusting Altitude Limits: Most drones allow users to adjust the maximum altitude limit within certain bounds. For example, DJI drones have default limits but can be set to values between 2 to 500 meters. Other brands may have different maximum altitude values, and updating drone firmware can change these limits.
While adjusting limits provides flexibility, it comes with responsibilities, and users must accept these responsibilities when changing altitude limits. For drones with developer kits, it may be possible to disable preset altitude limits, but this requires more effort and isn't a quick adjustment.
Considerations for Drone Pilots: The article addresses the question of whether there's a compelling reason to fly above the 400-foot limit. For professional drone pilots, certain jobs may necessitate exceeding this limit, such as inspections of towers or bridges. However, recreational drone pilots, lacking applicable exceptions, are advised to adhere strictly to the altitude restrictions.
In conclusion, the 400-foot altitude limit is in place for airspace safety, with the potential consequences of drone collisions with manned aircraft being severe. The article emphasizes the importance of understanding and following these regulations to maintain safe drone operations and avoid potential tragedies.
