The 5 sewing tools you'll wish you bought earlier! | Cashmerette (2024)

If you’re anything like me, you’ll spend years pondering whether to buy a new sewing tool – and once you have it you’ll wonder how on earth you ever did without it! I’m always wary of diving in too deep too quickly with new hobbies (I’ve been sewing for nearly a decade but somehow still think of myself as a beginner learner…), which makes me cautious when it comes to investing in tools of the trade. But here are five sewing tools I can tell you you’ll wish you bought earlier!

When I first started sewing I was constantly in awe of the amazing neat topstitching that more advanced sewists would achieve – I could never imagine my hands being that steady! And then, I discovered the JOY that is an edge-stitching foot, and learned that practically-perfect topstitching was well within my reach. Note: these feet only work if your machine can move the needle left and right, unfortunately if the needle is always stuck in one place they won’t work.

The secret to an edge-stitching foot is that it has a blunt blade down the middle of the foot (which is often present in an edge-joining foot or blind hem foot, so they can work equally well). As you sew, you place that blade into the valley of the seam or at the edge of the fabric, and then push the needle either to the left or right of the seam (depending on where you need the topstitching). The blade “sticks” in the seam and guides the needle incredibly accurately – voila, amazing topstitching! This is the type of sewing tool that all RTW is made with – it massively lowers the technical skill you need, and gives really professional results. I wouldn’t be without mine.

For more topstitching tips, check out my post on jeans topstitching.

There are generic edge-stitching feet available like this one, which I can’t vouch for, but I know many people have luck with generic feet. For my Bernina, I use the Blindstitch Foot #5, but they also have an Edgestitch Foot #10C.

Oh, Wonder Tape, how I adore thee! Now I know what you’re thinking: using sticky tape in sewing just seems like cheating or at least a low-quality way to sew. But forget that idea at once! Wonder Tape is a water-soluble thin double-sided sticky tape which doesn’t gum up your machine needle, and washes out as soon as your garment is washed. It acts like super-efficient pins – except without the bumps that pins cause, and with a more consistent hold. It’s also a lot less messy than glue sticks, which I’ve never got on well with.

Once you start using Wonder Tape, you’ll find more and more uses for this amazing sewing tool. Here are my top uses:

• Sealing button plackets before you topstitch. Anywhere that accuracy is important, Wonder Tape is your friend. When I’m sewing a button placket on the Harrison Shirt or Lenox Shirtdress I always seal the placket closed using Wonder Tape rather than pins – I get a reliable hold, no bumps or bunching from pins.
• Keeping waistbands closed on the wrong side when you’re sewing on the right side. You know when you’re topstitching a waistband shut from the right side, and hoping you’re going to catch the open underside without it flapping about? WONDER TAPE TO THE RESCUE! It’ll keep everything closed and no hidden pins on the wrong side to wrangle with.
• Securing shirt sleeve plackets during sewing. I couldn’t be without Wonder Tape when performing the complex origami of a shirt placket construction. Simply use Wonder Tape to close each fold during the placket construction and it’s 10 times easier.
• Hemming lightweight fabrics. Trying to keep fiddly small hems flat when you’re hemming a lightweight fabric like silk or chiffon can be a real pain. Break out the Wonder Tape, folks! And even better: if you’re doing a baby hem, Wonder Tape is 1/4″ wide, so you can stick it straight on the edge of the fabric, then fold it over the tape for a perfect 1/4″, and then fold over again for a great 1/2″ finished hem. I also often use Wonder Tape on regular knit fabric hems as it helps them squishing and moving under the presser foot.

Transparent quilting rulers are excellent sewing tools for all kind of garment and pattern measuring and altering – ours get used on a daily basis at Cashmerette HQ. However, if you try to use one with a rotary cutter it’s *very* easy to shave bits of plastic off every time, which is far from ideal. Enter: the metal-edge quilting ruler. I discovered these randomly one day in a now-forgotten sewing store, but I am now a dedicated fan. You get all the benefit of a transparent ruler, but use the metal side with a rotary cutter and you get a dead-straight cut, no risk of plastic shaving!

I’ve definitely had more than one funny comment when recommending using a ham in sewing – won’t that make your garments smell… porky?! But of course what I actually mean is a tailor’s ham, which is a stuffed tool to help you with pressing. You may have heard it before, but that’s because it’s true: the secret to really professional garment sewing is great pressing. If you’re making a garment with curves like princess seams or a collar – and if you’re a curvy person that’s almost inevitable – then you need to be able to press those curves without squashing them straight down on an ironing board. Enter the ham, shown on the left here:

A ham typically has two sides: one is made from cotton, for pressing cotton and other smooth fabrics; the other is often plaid wool, and is intended for pressing wool and other fabric with a nap. There are lots of different curve shapes on the ham, depending on which way you tip it. There’s a pointier and rounder end, and you can also use the “edge”, or indeed any curve you need. Simply place the seam you need to press over the part of the ham that most corresponds best to the curve of the seam, and press away! Be careful: you often have to hold the ham in one hand while you press with the other, and you don’t want to steam your fingers. If you’re making a special garment or a bulkier one like a coat, I also really recommend keeping the seam on the ham until it cools – that way it really locks the curved shape into the fabric fibers (a bit like curling your hair).

The second secret weapon for awesome pressing is a clapper. It looks so innocuous! And nothing like a sewing tool. But believe me when I say that the clapper is the absolute best way of getting super flat and crisp seams. Once you’ve sewn your seam, press it with steam and then immediately place the clapper on top – if you’re sewing with a heavy wool or lots of layers, you can also put quite a bit of pressure onto that clapper. The soft wood in the clapper draws the steam out while simultaneously pressing all the fibers flat – the result is fantastically flat seams. It might not seem like it would make a big difference, but you’d be amazed!

So what do you think? Do you own these sewing tools – or what others would you add to the list?