Non-specialized hardware comparison - Bitcoin Wiki (2024)

Due to the rising hashrate of the bitcoin network caused by the introduction of ASICs to the market, GPU mining Bitcoins has become impracticable. The hashrate of most GPU units is below 1GH/s, and as of 2014, some single ASIC units are able to reach speeds of over 1,000GH/s while consuming far less power than used by a GPU. The information in this table is preserved for historical interest, but does not include many GPUs which were released after the advent of ASIC mining.

Stream SDK 2.5 seems to have resolved many of the problems with earlier versions. Everyone's setups will be unique so this should only be a guide or starting point, not an absolute.

ModelMhash/sMhash/JMhash/s/$[1]WattsClockSPSDKSlotMinerNotes34100.890.074?12(?)222401.4 betaPCI-E 1.1 x8A custom Brook+ minerUsing 16,384 length streams3XXXOpenCL Not Supported42XXOpenCL Not Supported (integrated/mobile GPU)43506.930.3460.162057580-PCI-E 2.0 x16poclbm-w 32, don't use vectors43507.26001.1PCI-E 2.0 x16cgminer/Linuxdefault settings43508.14-0.19-730802.4PCI-E 2.0 x16Diablo/Windows7-w 32. Model: Asus EAH4350 Silent. Memory at 400MHz. Runs at 60°C with ambient at 25°C.435010.7---730-2.6PCI-E 2.0 x16CGMiner/Windows7-v -w 64 Voltage set at 0.900 core set at 800MHZ and memory set to 200MHZ45507.230.2890.132560080-PCI-E 2.0 x16poclbm-w 32, don't use vectors45507.8-PCI-E 2.0 x16guiminer /phoenixworksize=64 VECTORS4570M8.020.297?2768080-PCI-E 2.0 x16Diablo/Windows7-w 64, SDK 2.4, Cat 11.4. Model: Sony Vaio NW4570M9.60.300?32825(OC)80-PCI-E 2.0 x16Diablo/Windows7-w 64, SDK 2.4, Cat 11.4. Model: Sony Vaio NW. OC core 680->825. U/C memory 800->500.465031.330.6530.4448650320-PCI-E 2.0 x16poclbm-w 32, don't use vectors467036.140.6130.3459750320-PCI-E 2.0 x16poclbm-w 32, don't use vectors467040.110.6790.3859800320-AGP x8poclbm/Ubuntu 10.10 w/ H == 0 mod-w 32 -f 0, don't use vectors source467050-0.4760800320-PCI-E 2.0 x16guiminer2 miners set up i7 920 (130W), CPU: Ufasoft, GPU: OpenCL; the CPU is getting about 40 Mhash/s while the GPU goes from 10-20 Mhash/s473072.290.657?110750640-PCI-E 2.0 x16-477072.290.9040.7280750640-PCI-E 2.0 x16-483055.420.58395575640-PCI-E 2.0 x16-483061.7--700-2.4PCI-E 2.0 x16poclbm-modFedora 14483064.9---700-2.4PCI-E 2.0 x16poclbm-modFedora 14483066.120.5031057001005-PCI-E 2.0 x16-485075.300.685110625800-PCI-E 2.0 x16-485084.30.766110725300-PCI-E 2.0 x16--w64 fan at 70% temp 73C, stock voltage -gui miner485087.40.79-110785800-PCI-E 2.0 x16guiminerPhoenix; -k poclbm485090.10.819110800500-PCI-E 2.0 x16guiminer-f 30; Tried phoenix and phatk, got same max48501010.9181108175002.1PCI-E 2.0 x16guiminer-f 0, core 817mhz(default 625)@1.123v , mem downclock to 500mhz (default 993) source4850x2150.600.6022506251600-PCI-E 2.0 x16-486067.470.519130700640-PCI-E 2.0 x16-4870780.520150---PCI-E 2.0 x16m0mchil's OpenCL/Vista 64bitsource487088140std80012.3.6PCI-E 2.0 x16phoenix 1.50 / 64bit OS X pyopencl / poclbmStandard Mac Pro 3,1 with Apple HD4870 upgrade. Flags: FASTLOOP WORKSIZE=64 AGGRESSION=5 (don't use vectors, and hash rate drops to 60-70 if browser windows are visible, speeds up to 88 if you hide them!487090.360.6021507508002.1PCI-E 2.0 x16clmine487092.840.6189333(?)150(?)830(OC)8002.4PCI-E 2.0 x16Phoenix 1.48-k poclbm AGGRESSION=5 (Windows 7 64-Bit, GPU OC 750->830MHz, VRAM UC 900->450MHz, BIOS modded)4870961407508002.4PCI-E 2.0 x16Smartcoin r657s / phoenix 1.50 / Linuxcoin 0.2b finalPowercolor @ GPU 830 MHz/ MEM 200 Mhz @ 80% FAN @ 69 temp @ Flags: -k phatk bfi_int=false FASTLOOP=false WORKSIZE=256 AGGRESSION=1148701041407508002.4PCI-E 2.0 x16Smartcoin r657s / DiabloMiner / Linuxcoin 0.2b finalPowercolor @ GPU 830 MHz/ MEM 200 Mhz @ 80% FAN @ 69 temp @ Flags: -v 1 -w 2564870104.2??830(OC)8002.1PCI-E 2.0 x16poclbmWindows 7 64-Bit, GPU Core OC to 830 MHz, GPU Memory UC to 200 MHz By MSI AfterBurner. Card: Gainward Golden Sample. @70%Fan we have 55 GPU temp.4870104.60.872120830(OC)8002.1PCI-E 2.0 x16poclbm-w 256 -f 1, Windows 7 64-Bit, GPU Core OC to 830 MHz, GPU Memory UC to 190 MHz (saves 30 watts at outlet)48701121407508002.4PCI-E 2.0 x16BAMT 0.5c / cgminerPowercolor @ GPU 875 MHz/ MEM 300 Mhz/ 1,25VDC @ 100% FAN @ 65 temp @ Flags: -v 1 -w 2564870x2180.60.6322868001600-PCI-E 2.0 x16-4870x2180.720.6322867501600-PCI-E 2.0 x16-4870x2203850(OC)16002.6PCI-E 2.0 x16poclbm-mod ver. 20 april 2011Gainward / Win7 x64 / -w 256 -f 1 / 850MHz GPU - 300MHz Mem - 1,262V - 100% fun: 72C489097.10.511190870(OC)10502.4PCI-E 2.0 x16GUIMiner v2011-01-21 Solo settingsSapphire fab. No flags options helped. Close all browsers and do full restart of GUIMiner and then Bitcoin via GUIMiner server starter or the browsers GPU accl. will limit to 56~ ish Mhash/s - I can now start browser without slowdowns4890102.410.539190850800-PCI-E 2.0 x16-4890108.30.57190975800-PCI-E 2.0 x16-4890121.5-1901025 (OC)8002.4PCI-E 2.0 x16poclbmno flags, Vcore 1.4545011.990.6311965080-PCI-E 2.1 x16-545013.74--700--PCI-E 2.1 x16poclbm/Linuxcoin v0.2-v -w128 tried several options, seems to work best.545014.12--700--PCI-E 2.1 x16Phoenix/Linuxcoin v0.2Flags: "DEVICE=0 VECTORS AGGRESSION=4 -v FASTLOOP BFI_INT WORKSIZE=64" Kernel: "phatk"545015.36--700--PCI-E 2.1 x16PhoenixFlags: "DEVICE=0 VECTORS AGRESSION=8 FASTLOOP BFI_ING WORKSIZE=128" Kernel: "phatk" - MagicSata545018.10--774--PCI-E 2.1 x16poclbm-v -w 128 -f 1 774.66MHz/300.37MHz547017.10------poclbm-v -w 128 MobileGPU555040.591.04139550320-PCI-E 2.1 x16-555062.10---700--PCI-E 2.1 x16Phoenix700MHz core 800MHz ram, phatk mod, Flags: "-k phatk worksize=128 vectors aggression=4 bfi_int"557059.961.53839650400-PCI-E 2.1 x16-5570621.59396504002.4PCI-E 2.1 x16Phoenix 1.48 OpenCL/Linux x86_64-k phatk DEVICE=0 VECTORS AGGRESSION=4 -v FASTLOOP BFI_INT WORKSIZE=645570641.64139650--PCI-E 2.1 x16m0mchil's OpenCL/WinXPsource5570731.872397004002.4PCI-E 2.1 x16Phoenix 1.48 OpenCL/Linux x86_64-k phatk DEVICE=0 VECTORS AGGRESSION=4 -v FASTLOOP BFI_INT WORKSIZE=64557086.32.397367753002.4PCI-E 2.1 x16Phoenix 1.75 OpenCL/Windows 7 x64 (no Aero)-k phatk VECTORS BFI_INT FASTLOOP=false AGGRESSION=11 -v WORKSIZE=256 Fan 100% 86C Undervolted @ 0.96v using Sapphire Trixx557094stock8808002.4PCI-E 2.1 x16GUI Miner 02-12/Windows 7 x86-v -w128 75C55701021.46(+)75(-)9504002.4PCI-E 2.1 x16Phoenix 1.48 OpenCL/Windows 7 x86 (no Aero)-k phatk DEVICE=0 VECTORS AGGRESSION=7 -v FASTLOOP BFI_INT WORKSIZE=256 (Reference Sapphire card, 2 additional 120mm coolers, temperature is 79-82C)5650481.3735(?)---PCI-E 2.1 x16m0mchil's OpenCL/Win7-64source source -- not TDP but load565061.2352.4PCI-E 2.1 x16Phoenix 1.50 OpenCL/Windows 7 x64-k phatk DEVICE=0 VECTORS BFI_INT WORKSIZE=128 AGGRESSION=9567071.491.11764775400-PCI-E 2.1 x16-5670721.6444850--PCI-E 2.0 x16poclbm-mod (Win7-64)Sapphire 100287VGAL card is low power567085--900400-PCI-E 2.1 x16poclbm-v -f 0 -w 128567091--890400-PCI-E 2.1 x16guiminer 2011-06-09 poclbm catalyst 11.2 win7 x86-v -f 0 -w 1285670100--890400-PCI-E 2.1 x16cgminer 1.5.6GPU/Mem 890/800 temp 72C5670103--900/2754002.4PCI-E 2.1 x1phoenix-1.50 / phatk-mod / Ubuntu 11.04VECTORS BFI_INT FASTLOOP=false AGGRESSION=11 WORKSIZE=256 / small fan, under 50 deg C, no voltage tweaks... catfish5670127.8--850--PCI-E 2.1 x16Windows 7 (64bit) Phoenix 2.0Aggression=11 Worksize=128 Fastloop=False Opencl5750105-------poclbmApple iMac 27inch (Mid 2010), Mac OSX 10.7 Lion5750116.241.35286700720-PCI-E 2.1 x16-5750137--710720-PCI-E 1.1 x16poclbm-v -f 0 -w 128 using stock memory and GPU clocks5750146.4--775720-PCI-E 2.0 x16GUIMiner v2011-05-21-v -w128, AMD Catalyst overclock (775MHz GPU / 1225 MHz Memory)5750154.561.45106830720-PCI-E 2.1 x16--v -w128 -f20 underclocked memory clocks from 1150MHz to 300MHz5750170--870720-PCI-E 1.1 x16poclbm-v -f 0 -w 128 patched BIOS to underclock memory to 300MHz5750173--875720-PCI-E 1.1 x16phoenix875/300 w/MSI Afterburner, BFI_INT VECTORS AGGRESSION=12 FASTLOOP=FALSE -k phatk5750177--910/5757202.6PCI-E 2.0 x8phoenix 1.5.6PowerColor GoGreen+fan, MSI Afterburner 2.2Beta, -k phatk VECTORS AGGRESSION=12 FASTLOOP=FALSE WORKSIZE=645750190--930/290-atistream sdkPCI-E 1.1 x16poclbm930gpu / 290mem (O.S. Ubuntu 10.10 x64, overclock gpu & underclock mem) with poclbm options -v -f 0 -w 2565750 Vapor-X195--125975/300-2.4PCI-E 1.1 x16cgminer 2.7.5(O.S. Ubuntu 12.01 AMD64 dedicated) cgminer options -Q 0 -I 9 -g 2 -w 256 --auto-fan --temp-target 65 --gpu-vddc 1.075 (Fan speed 60~65%)5750x2 CF356--870720x22.4PCI-E 2.0 x16cgminer v1.5.1 (Win7 64bit)870MHz GPU / -I 8 / 2x GIGABYTE GV-R575SL-1GI cards + GIGABYTE GA-790FXTA-UD5 MB + 1x 80mm, 1x 90mm Noctua coolers5770156.831.4521088508002.1PCI-E 2.1 x16clmine5770171.12----stock-PCI-E 2.1 x16phoenix 1.7.3/debian gnu/linux 6 squeeze-k phatk2 DEVICE=0 VECTORS BFI_INT FASTLOOP=false AGGRESSION=12 WORKSIZE=25657701801.406(*)128(*)950(OC)8002.4RC1PCI-E 2.1 x16poclbm-v -w 128 -f 30 (*: Overclocked wattage calculated here)5770 Hawk182--8758002.4PCI-E 2.0 x16poclbm/GUIMiner/Win7-64-v -w 128 (875MHz is stock for 5770 Hawk)5770185--85012002.4PCI-E 2.1 x16phoenix 1.48 / phatk-k phatk VECTORS BFI_INT WORKSIZE=128 FASTLOOP AGGRESSION=75770205.58--9353002.1PCI-E 2.1 x16poclbm 2011-04-28-v -w 2565770214.51.95(-)108(+)9503002.4PCI-E 2.1 x16phoenix 1.50/GUIMiner/Win7-64mem underclocked 300 mhz, 1.1vcore, 950mhz core, @69°C/57%FAN VECTORS BFI_INT AGGRESSION=12 -k phatk WORKSIZE=2565770214.71.95(-)108(+)9508002.4PCI-E 2.1 x16phoenix 1.48 / win7x86mem underclocked 309 mhz, -k phatk DEVICE=0 VECTORS BFI_INT FASTLOOP=false AGGRESSION=125770216.5--9552.1PCI-E 2.0 x16Phoenix 1.5 /phatkModified phatk kernel and stock voltage for Sapphire (1.125V) VECTORS BFI_INT FASTLOOP=false AGGRESSION=12 -k phatk WORKSIZE=2565770218.35--100014012.1PCI-E 2.0 x16DiabloMiner-w 128 -v 2 (Overclocked to 1Ghz core with 1.2 voltage and Scythe Setsugen 2 cooling system)57702232.23(-)100(+)10503002.4PCI-E 2.1 x16guiminer-v -w256 source5770227--10308002.1PCI-E 2.0 x16DiabloMiner-w 256 -v 2 (Overclocked to 1030 core/300 mem with 1.2 voltage and Scythe Setsugen 2 cooling system)57702332.23(-)100(+)10503002.4PCI-E 2.1 x16phoenix 1.48VECTORS BFI_INT FASTLOOP=false AGGRESSION=12 -k phatk WORKSIZE=256 source5770236--1033/2758002.4PCI-E 2.1 x16phoenix-1.50 / phatk-mod / Ubuntu 10.04VECTORS BFI_INT FASTLOOP=false AGGRESSION=11 WORKSIZE=256 / big fans, under 75 deg C, no voltage tweaks... catfish5770240.612.3632(-)100(+)10803002.4PCI-E 2.1 x1phoenix 1.48VECTORS BFI_INT FASTLOOP=false AGGRESSION=12 -k phatk WORKSIZE=256 (OC'd and OV'd 1080/300 1.25v)5770241--100(+)10452502.1PCI-E 2.1 x16phoenix 1.50VECTORS BFI_INT AGGRESSION=13 -k phatk WORKSIZE=256 (OC 1020/300) XFX@1.1 volts. +Kernel function improve 5%5770244--10503002.1PCI-E 2.0 x16Phoenix 1.75 /phatk2Modified phatk kernel and stock voltage for Sapphire (1.125V) VECTORS BFI_INT FASTLOOP=false AGGRESSION=9, Temp 75C, FAN 100% (manual)5770x2425--225(+)960800x22.1PCI-E 2.1 x16poclbm (guiminer) Win7x64-v -w128 (OC 960/1200)5830M120--5701202.4PCI-E 2.1 x16Phoenix 1.50 OpenCL/Win7 x64-k phatk DEVICE=0 VECTORS BFI_INT AGGRESSION=13 FASTLOOP=false58302441.3617980010002.4PCI-E 2.1 x16Phoenix 1.48 OpenCL/Linux x86_64-k phatk DEVICE=1 VECTORS AGGRESSION=6 -v FASTLOOP WORKSIZE=128 BFI_INT58302451.281928809002.4PCI-E 2.1 x16poclbm (guiminer)-v -w 25658302481.291928805002.4PCI-E 2.1 x16phoenix 1.46-k poclbm VECTORS BFI_INT AGGRESSION=115830256--9003002.4PCI-E 2.1 x16phoenix 1.48-k poclbm VECTORS BFI_INT AGGRESSION=75830267--87510002.4PCI-E 2.1 x1Phoenix 1.48 OpenCL/Linux x86_64-k phatk DEVICE=1 VECTORS AGGRESSION=6 -v FASTLOOP WORKSIZE=128 BFI_INT58302721.52179875-2.4PCI-E 2.1 x16phoenix 1.48 / phatk / LinuxCoin275Mhz Memory clock, 1.125 V (from 1.163), VECTORS AGGRESSION=12 BFI_INT58302751.57141759005002.1PCI-E 2.1 x16poclbm (guiminer) Win7x64-v -w64 -f10, XFX stock w/ v2.4 SDK = 230Mh/s, v2.1 SDK = +10Mh/s, overclocking core clock by 100 = +30Mh/s, underclocking memory to 500 (ran cooler), and changing workload to -w64 = +5Mh/s.5830285-1.58-960-2.4PCI-E 2.1 x16phoenix 1.47 / poclbm / Win7 64VECTORS BFI_INT FASTLOOP=false AGGRESSION=125830290--930-2.2PCI-E x16/x4/x1GUIMiner / phoenix 1.5 / POCLBM / Win 7 64POCLBM VECTORS BFI_INT WORKSIZE=256 AGGRESSION=12 FASTLOOPS=false / Memory 300Mhz, VCore standard5830290--996-2.4PCI-E 2.1 x16phoenix 1.4 / poclbm / Win7 64VECTORS AGGRESSION=12 BFI_INT5830295--98011202.1PCI-E 2.1 x16GUIMiner / poclbm / Win XP 32Extra flags -v -w 1285830297--97011202.4PCI-E 2.0 x16guiminer / phoenix 1.48 / phatk / Win7 64300Mhz Memory clock, 44% fan-speed, -k phatk VECTORS BFI_INT AGGRESSION=8 FASTLOOP=false WORKSIZE=2565830300--9603002.4PCI-E 2.1 x16GUIMiner / poclbm / Win 7 64Extra flags -v -w 256 (Sapphire Extreme 71 degrees @ 52% fan)5830300--970-2.4PCI-E 2.0 x16phoenix 1.47 / pheonix 1.48 / Win7 64(sapphire xtreme) VECTORS BFI_INT FASTLOOP=false AGGRESSION=125830300--97011202.1PCI-E x16phoenix 1.48 / phatk / Win7 64300Mhz memory clock BFI_INT AGGRESSION=12 FASTLOOP=false WORKSIZE=2565830305--984-2.4PCI-E 2.1 x16phoenix 1.4 / phatk / Win7 32400Mhz Memory clock, VECTORS AGGRESSION=12 BFI_INT FASTLOOP=false5830307--996-2.4PCI-E 2.1 x16phoenix 1.48 / phatk / Win7 64VECTORS AGGRESSION=12 BFI_INT58303072.252.55125965--PCI-E 2.1 x16cgminer 2.0.5 / Win7 64Mem @ 300/Stock voltage/Entire system 200W5830308--9903002.4PCI-E 2.1 x16phoenix 1.50 / poclbm / Xubuntu 11.04 x64VECTORS AGGRESSION=11 BFI_INT FASTLOOP=false WORKSIZE=2565830308--9903752.1PCI-E 2.1 x16phoenix 1.48 / phatk / Win7 32@ stock voltage VECTORS AGGRESSION=11 -v FASTLOOP=false BFI_INT5830 black310--9903002.4PCI-E 2.1 x8LinuxCoin 0.2b, phoenix/phatk(XFX Brand) -k phatk VECTORS BFI_INT WORKSIZE=256 AGGRESSION=11 FASTLOOPS=false5830311--10003002.4PCI-E 2.1 x16phoenix 1.50 / phatk / LinuxVECTORS BFI_INT AGGRESSION=13 FASTLOOP=false WORKSIZE=2565830315--970-2.4PCI-E 2.1 x16phoenix 1.6.1 / phatk2 / CrunchBang Linuxmemory @ 300mhz VECTORS BFI_INT AGGRESSION=9 WORKSIZE=2565830316--10153752.1PCI-E 2.1 x16phoenix 1.48 / phatk / Win7 32@ stock voltage VECTORS AGGRESSION=12 -v FASTLOOP=false BFI_INT5830319-1.77-1030-2.4PCI-E 2.1 x16phoenix 1.48 / phatk / Xp 641.2v 355Mhz Memory, VECTORS AGGRESSION=12 BFI_INT5830321--100011202.4PCI-E 2.0 x16phoenix 1.50 / phatk-mod / Linux1000Mhz GPU, 350Mhz RAM, 1.15V, 90% fan, ~60c Temp, VECTORS BFI_INT FASTLOOP=false AGGRESSION=13 WORKSIZE=128; phatk kernel found here5830323900 (OC)2.4PCI-E 2.1 x16phoenix 1.5 Win7x64(500Mhz RAM), ~61c Temp, 57% fan, BFI_INT FASTLOOP=false VECTORS AGGRESSION=12 -v WORKSIZE=645830 (127$)3251.982.57Mh/$165W1040MHz200MHz2.6PCI-E 2.0 x8Guiminer/phatk-mod w7 64bit-k phatk AGGRESSION=12 VECTORS2 WORKSIZE=128 stock volt, watercooled 53C5830328---1040-2.4PCI-E 2.1 x16LinuxCoin 0.2.1b / phoenix / phatk1.195 V, RAM @ 325 Mhz, fan @90%, no case, extra 10K RPM fan (62 deg.C in full-load); options: -k phatk DEVICE=0 VECTORS BFI_INT FASTLOOP=false AGGRESSION=11 WORKSIZE=256; brand: Sapphire Xtreme; bord is stable up to 1060 Mhz ~ 335 MHash, but produces some visual artefacts;5830331-4.14-101011202.4PCI-E 1.0 x16WinXP 32 / Phoenix 1.7.5 / phatk2Stock Voltage, RAM 300, 64C, Fan 67%, -k phatk2 VECTORS BFI_INT AGGRESSION=11 WORKSIZE=256 FASTLOOP=false (+6Mh w/ Phoenix 1.7.5 over 1.6.2)5830333---1040-2.4PCI-E 2.1 x16LinuxCoin 0.2.1b / phoenix-1.50 / phatk-mod+ ~5 Mhash increase using the modified phatk from the user above. I am the same guy with 330 @ 1040 MHz Sapphire Xtreme, all other settings the same, board stable, no increase in rejected5830334--1040-2.5PCI-E 2.0 x16phoenix 1.75 / phatk 2.2 / Win7 64Stock voltage, 208Mhz Memory, VECTORS AGGRESSION=12 WORKSIZE=128 BFI_INT5830334--1030-2.4PCI-E 2.1 x16phoenix 1.50 / phatk 2.0 / Win7 64Stock voltage, 385Mhz Memory, VECTORS AGGRESSION=12 WORKSIZE=256 BFI_INT -- (upped from 330 achieved with diapolo mod here), now using phatk 2.0 found here5830342---1045-2.4PCI-E 2.0 x8phoenix 1.48 / phatk 2.2 / WinSvr 2008 R2 64Stock voltage, 385Mhz Memory, VECTORS VECTORS4 FASTLOOP=false AGGRESSION=14 BFI_INT -k phatk-2.25830x2 CF480--800-2.4PCI-E 2.1 x16Guiminer-v -f70 -w1285830x2570--950-2.4PCI-E 2.1 x8Guiminer/ - / Win7 64bit poclbmpoclbm -v -w256 -f10 MEMORYCLOCK 300MHZ GPUCLOCK 950MHZ FAN 52% 72°C5830x2608--990--2x PCI-E 2.0 x16phoenix 2.0/ phatk2 / Win7 32bitStock voltage, 300Mhz Memory, VECTORS GOFFSET AGGRESSION=12 WORKSIZE=256 BFI_INT FAN 51% 69°C (Open ATX case)5830x619671.621.97-1020/3401120x62.4PCI-E 2.1 x1Phoenix 1.7.5/phatk2/BAMT Linux100% fan @65C / 1.162V / CCC 11.6 / BFI_INT VECTORS FASTLOOP=false AGGRESSION=11 WORKSIZE=2565850240.771.5951.491517251440-PCI-E 2.1 x16-5850250.261.6571517251440-PCI-E 2.1 x16opencl clientsource58502521.57516076514402.3PCI-E 2.1 x16poclbm 2011-01-255850255.31.59316076514402.2PCI-E 2.1 x16poclbm 2011-01-2558502641.74815172514402.4PCI-E 1.0 x8guiminer-20110501-v -w12858502801.7516076514402.2PCI-E 2.1 x16Phoenix 1.3with BFI_INT5850280--72514402.1PCI-E 2.1 x16Phoenix 1.50 / Fedora 14-v -k poclbm VECTORS AGGRESSION=8 WORKSIZE=128 BFI_INT FASTLOOP=true5850282.753.06-92.25666 (UC)14402.1PCI-E 2.1 x16Phoenix/WinXPundervolted to 0.95V; phatk2 VECTORS BFI_INT AGGRESSION=11 WORKSIZE=256; driver 10.12; clocktweak for setting values; thread58502921.82516076514402.1PCI-E 2.1 x16poclbm 2011-04-28 -v -f 158502981.862016076514402.1PCI-E 2.1 x16poclbm 2011-04-28 -v -f 1 -w 6458503001.5460194925(OC)1440-PCI-E 2.1 x16m0mchil's OpenCLsource5850304--725 (stock)14402.1PCI-E 2.1 x16cgminer.exe -v 2 -I 8 -w 256 --gpu-memclock 27558503141.8362171820(OC)14402.4PCI-E 1.0 x8poclbm-v -w1285850328--875 @ Stock voltage14402.4PCI-E 2.1 x16phoenix70C @42% fan, mem @ 500mhz; -v -k phatk VECTORS BFI_INT AGGRESSION=8 FASTLOOP=false WORKSIZE=1285850330--850 @ Stock voltage14402.1PCI-E 2.0 x16phoenixEAH5850, miner arguments: -k poclbm DEVICE=1 VECTORS AGGRESSION=8 WORKSIZE=128 BFI_INT FASTLOOP=false5850331--725 (Stock)2.4PCI-E 2.0 x16Diablo Win7 64bitsSapphire 5850 Xtreme, Arguments: -v 2 -w 192 (by Swapper 2011-07-05)58503351.8611180890(OC)14402.4PCI-E 2.0 x8poclbm-v -w128, Memory downclocked to 300Mhz58503441.8594185890(OC)1440-PCI-E 2.0 x16phoenix5850347--87614402.4PCI-E 2.0 x16guiminer / phoenix 1.48 / phatk / Win7 64300Mhz Memory clock, 50% fan-speed, -k phatk VECTORS BFI_INT AGGRESSION=11 FASTLOOP=false WORKSIZE=2565850354--900(OC)14402.1PCI-E 2.0 x16diablo -v 2 -w 128Ubuntu 11.04 64-bit Headless, catalyst 11.5, memory downclocked to 300mhz, stock voltage. flashed with atiflash video5850355--900(OC)14402.1PCI-E 2.0 x16phoenix 1.48 / phatkUbuntu 11.04 64-bit, Memory downclocked to 200MHz, VECTORS BFI_INT FASTLOOP=false AGGRESSION=11 WORKSIZE=1285850355--90014402.1PCI-E 2.0 x16phoenix 1.48 / phatk / Ubuntu 11.04 x64300Mhz Memory clock, 60% fan-speed, -k phatk VECTORS BFI_INT AGGRESSION=11 FASTLOOP=false WORKSIZE=2565850356--870 (OC)14402.5PCI-E 2.0 x16cgminer 2.1.2 / Win 7 x64302Mhz Memory clock, 85% fan-speed, Stock Voltage, -I 6 -v 2 -w 256 (2012-02 by Swapper)5850359--90014402.4PCI-E 2.0 x16phoenix 1.50 / phatk / Ubuntu 11.04 x64300Mhz Memory clock, 66% fan-speed, -k phatk VECTORS BFI_INT AGGRESSION=13 FASTLOOP=false WORKSIZE=2565850365--92014402.1PCI-E x16phoenix 1.48 / phatk / Win7 64300Mhz memory clock VECTORS BFI_INT AGGRESSION=13 FASTLOOP=false WORKSIZE=2565850367.5--900(OC)14402.1PCI-E 1.0 x16diablo with bitless's hack, -v 2 -w 128RHEL 5U5 x86_64, catalyst 11.5, Sapphire HD 5850 Xtreme, Memory downclocked to 300MHz, core voltage 1.145V, BIOS modded with RBE5850369.4--93014402.4PCI-E 1.0 x16guiminer / phoenix / phatk / Win7 32Catalyst 11.5, XFX HD5850, Memory downclocked to 322MHz, -k phatk VECTORS BFI_INT AGGRESSION=13 WORKSIZE=25658503721.68-220 @ Wall9003002.5PCI-E 1.1 x8cgminer 2.3.1 from source / Ubuntu 11.11 x86_64-I 8 -v 2 -w 256 --- hex-core opteron cpu w/ 12GB RAM and cgminer CPU bug in linux makes power usage a little high ~210w in windows 7 x86_645850375--94014402.4PCI-E 2.0 x16phoenix 1.50 / phatk / Ubuntu 10.04300Mhz memory clock VECTORS AGGRESSION=13 WORKSIZE=256 BFI_INT FASTLOOP=false5850381--94014402.5PCI-E 1.0 x16phoenix / phatk / Win7 x64 / Catalyst 11.6MSI Afterburner 500MHz memory clock,-k phatk VECTORS BFI_INT WORKSIZE=256 AGGRESSION=1358503821.8454207995(OC)1440-PCI-E 2.0 x8phoenixOC 1.177v on core5850391--18072514402.4PCI-E 2.0 x16Win 7 Ultimate x64 / DiabloMiner / Catalyst 12.2ASUS DirectCU @ GPU 960 MHz / MEM 300 Mhz @ Voltage 1.2 @ 70% FAN @ 69 temp @ Flags: -v 2,1 -w 2565850391--100014402.1PCI-E 2.0 x16(@x8)phoenix 1.5 / phatk / Win7 64Mem @ 280, fan @ 100%, Temp @ 71, 1.163 V core, -v -k phatk VECTORS BFI_INT AGGRESSION=13 FASTLOOP=false WORKSIZE=256, The name is Mautobu5850392-2.43-99014402.4PCI-E 2.1 x16phoenix-svn (AUR) / phatk / Arch LinuxMemory: 180MHz, -v -q 1 -k phatk WORKSIZE=128 VECTORS BFI_INT AGGRESSION=13 FASTLOOP=false5850397--95014402.5PCI-E 2.1 16xphoenix 1.5 / phatk 2.2 / Win7 64, catalyst 11.6Mem speed 350Mhz, Fan 85%, 70C, 1.083 Vcore, -k phatk VECTORS BFI_INT AGGRESSION=12 FASTLOOP=false WORKSIZE=2565850400--100014402.4PCI-E 2.1 x16Phoenix 1.5 Win7 x64Memory 600MHz, Vcore 1.225, 73C, -k phatk WORKSIZE=128 VECTORS BFI_INT AGGRESSION=13 FASTLOOP=false, 3% phatk mod5850404--96514402.5PCI-E 2.0 x16(@x8)phoenixsvn / phatk2 / Ubuntu 11.04 / catalyst 11.85870 bios flash, Mem @322, fan@55%, Temp@83oC, 1.163Vcore, -k phatk2 VECTORS BFI_INT AGGRESSION=13 FASTLOOP=false WORKSIZE=2565850408---999/27514402.4PCI-E 2.1 x16phoenix 1.50 / phatk-mod / Ubuntu 10.04Fan 70%, temp < 60 deg C, Sapphire 5 heatpipe card, same flags as above/below (edit1- oops, no voltage tweaks... edit2- wow, phatk-mod makes a difference... catfish)5850412--101014402.4PCI-E 2.0 1x>16xphoenix 1.5 / phatk 3% mod / Win7 64 11.5VECTORS BFI_INT AGGRESSION=12 -k phatk5850414.8--10184502.4PCI-E 2.0 16xGUIMiner / Win7 64 11.7I use Sapphire HD5850 Toxic 2GB and for OC TRIXX Sapphire Tweak Utility v4.0.2. 72 deg C, fan 100%, core 1018mhz, mem 450Mhz, stock voltage (1.163). proof: http://img23.imageshack.us/img23/2367/414upload.png GUIMiner parameters: -v -w256 -f15850420--10553002.5PCI-E 2.0 1x>16xphoenix 1.5 / phatk 3% mod / Win7 64 11.6Fan 80%, 66C, 1.250 Vcore, -k phatk PLATFORM=0 DEVICE=0 VECTORS BFI_INT AGGRESSION=8 And proof: http://i.imgur.com/s9hqs.png5850431--104014402.4PCI-E 2.0 4x>16xphoenix-svn / phatk kernel / Debian Wheezy AMD64 + fglrx 11.6fan 100%, vcore 1.1750 V, 72C, VECTORS BFI_INT AGGRESSION=15 FASTLOOP=false -k phatk, proof: http://imageshack.us/photo/my-images/199/431u.png/5850432.15--10405002.5.793.1PCI-E 2.0 16xphoenix 1.7.5 / phatk2 kernel / Win7 x64 SP1fan 100%, vcore 1.212 V, 69C, VECTORS4 BFI_INT AGGRESSION=13 FASTLOOP=false WORKSIZE=64 -k phatk2, proof: http://dl.dropbox.com/u/18704286/mining%205850.png/ ... Card is REF HIS 5850 ... i mining at this speed for stable but... max unstable (if i play video/flashvideo it will crash) is 436.48Mhash/sec with core 1051 mem 500 vcore 1.237 (same other settings) it's too hot in VRM that not sound good to me... i don't want to kill it for my fun mining ... - Nito Niwatori5850x2620--80014402.4PCI-E 2.0 x16Guiminer ( cl miner ) v2012-02-19 Win7 x64MSI OC-Edition, -v -w 1285850x2702---905 (OC)14402.5PCI-E 2.0 x16 (x2)phoenix 2.0.0 / Win 7 x32ASUS DirectCU: 304Mhz Memory clock, 66% fan-speed, Voltage Tweak, AGGRESSION=13 FASTLOOP=false WORKSIZE=256 (https://www.dropbox.com/s/9u6f2jz3sz1poxb/5850.jpg)5850x2720--875 (OC)14402.5PCI-E 2.0 x16cgminer 2.1.2 / Win 7 x64302Mhz Memory clock, 85% fan-speed, Stock Voltage, -I 6 -v 2 -w 256 (2012-02 by Swapper)5850x31,010--850-2.4PCI-E 2.0 (x3)GUIMinerMSI Afterburner settings: 850MHz core clock and 500MHz memory clock5850x413601.94700@wall900poclbm5850x62,135--900-2.5PCI-E 2.0 (6 total, 4 full length, 2 @ PCIE1x with risersGUIMiner 24/8/2011 - poclbmWin 7 64Bit, Gigabyte GA-890FXA-UD5 motherboard, 4gb ram, AM3 cpu, Kingston SSD, Catalyst 11.8 drivers, guiminer switches: -v -f1 -w128, MSI Afterburner settings: 900MHz core clock and 1000MHz memory clock, cable risers required to fit all 6 cards, fans 100% Proof: http://i.imgur.com/6s7zv.jpg5870M152.5--750(OC)10002.1PCI-E 2.1 x16gui-miner (win-7)5870M189.2--850(OC)10002.5PCI-E 2.1 x16Wins 7 64/gui-miner (win-7)-v -w128 -f0 Graphics Overdrive setting 700->850 core clock & 900->1030memory clock . +35mhs over stock settings58703131.665188900?16002.3PCI-E 2.1 x16Diablo/Linux5870313.651.6681.6518885016002.1PCI-E 2.1 x16clmine58703401.8091888501600-PCI-E 2.1 x16m0mchil's OpenCLsource58703431.824188900?16002.1PCI-E 2.1 x16Diablo/Linux58703551.888188900?16002.1PCI-E 2.1 x16poclbm/Linux58703601.6822214970700-PCI-E 2.0 x16m0mchil's OpenCL w7-64-f 0 -v -w 128 source58703792.0151888501600-PCI-E 2.0 x16hashkill-0.2.5 alpha-D -G25870397--93016002.4PCI-E 2.0 x16Phoenix 1.48-k phatk VECTORS BFI_INT AGGRESSION=10 WORKSIZE=12858704001.904721095016002.4PCI-E 2.0 x8Phoenix 1.3-k poclbm VECTORS AGGRESSION=7 FASTLOOP BFI_INT58704081.888821698016002.1PCI-E 2.0 x16poclbm/Win7x64-f 20 -v -w 128, BIT_ALIGN, BFI_INT58704141.925521597516002.4PCI-E 2.0 x16guiminer/w7x64-k poclbm -v -w 256 -f 1 VECTORS BITALIGN BFI_INT -- Memory Clock 30058704202.000021095016002.4PCI-E 2.0 x16Phoenix 1.48-k phatk VECTORS BFI_INT AGGRESSION=14 WORKSIZE=256 -- Memory Clock 300Mhz58704211.958121597516002.4PCI-E 2.0 x16Phoenix 1.47VECTORS BFI_INT AGGRESSION=13 -k phatk5870421.52.0072019501600-PCI-E 2.0 x16hashkill-0.2.5 alpha-D -G2 (GPU OC to 900, memory downclocked to 900)587043098016002.4PCI-E 2.0 x16Phoenix 1.48/Windows 7 64-k phatk VECTORS BFI_INT AGGRESSION=14 WORKSIZE=256 -- Memory Clock 300Mhz587043298516002.4PCI-E 2.0 x16Phoenix 1.73/Windows 7 64-k phatk VECTORS BFI_INT AGGRESSION=11 WORKSIZE=128 Memory Clock=900Mhz Asus 76C Fan=60% 65F ambient5870435--9903002.4PCI-E 2.0 x8LinuxCoin v0.2b phoenix/phatk(Powercolor brand) -k phatk VECTORS BFI_INT WORKSIZE=256 AGGRESSION=11 FASTLOOPS=false58704371.90960-2.1PCI-E 2.0 x1phoenix 1.50 + phatkCard is clocked with BIOS flash @ 960Mhz Core and 300Mhz Memory. More information and pictures: http://bitcointalk.org/index.php?topic=7216.msg324521#msg32452158704381.98192211000(OC)16002.1PCI-E 2.0 x16poclbm/Linux-v -w 64 -f 158704402.000022099516002.4PCI-E 2.0 x16Phoenix58704452.282.3419510053352.4PCI-E 2.0 x4Ubuntu 11.04 phoenix/phatk(Asus brand, volts = 1'072) -k phatk VECTORS BFI_INT WORKSIZE=256 AGGRESSION=12 FASTLOOPS=false -a 7 (-a 10)587045398016002.5PCI-E 2.1 x16Phoenix 1.50/Windows 7 64 catalyst 11.6 phatk 2.2-k phatk VECTORS BFI_INT AGGRESSION=12 WORKSIZE=256 FASTLOOPS=false -- Memory Clock 350Mhz Vcore 1.163v5870458--104016002.1PCI-E 2.0 x16poclbm/Windows 7 64-v -w 256 -f 1 Crossfired, Water cooled, 916 Mhash/s total. Best dual gpu setup me thinks? The name is Mautobu.5870460105016002.4PCI-E 2.0 x16Guiminer-k phatk VECTORS BFI_INT AGGRESSION=14 WORKSIZE=256 -- Memory Clock 300Mhz vcore @ 1225mV5870460102016002.4PCI-E 2.0 x16Phoenix 1.50/Windows 7 64VECTORS BFI_INT AGGRESSION=12 WORKSIZE=256 -k phatk -- Memory Clock 300Mhz vcore @ 1225mV, 3% phatk mod5870461100016002.5PCI-E 2.0 x16phoenix 1.75/Windows 7 64-k phatk2 (phatk 2.2) VECTORS BFI_INT AGGRESSION=9 WORKSIZE=128, Memory Clock=213, stock voltage5870481105016002.5PCI-E 1xphoenix 1.75/Windows 7 64-k phatk2 (phatk 2.2) VECTORS BFI_INT WORKSIZE=64 AGGRESSION=20 [MSI HD 5870 Ref Design vs Zalman VF3000A 1200mv Mem 600MHz]5870x2 (CF)864--90032002.1PCI-E 2.1 x16guiminer-k phatk VECTORS FASTLOOP=false AGGRESSION=7 BFI_INT WORKSIZE=128 (Same flags per GPU)5870x2 (Ares)620--85032002.1PCI-E 2.1 x16guiminer-v -w 1285870x2 (Ares)8260.751110095032002.1PCI-E 2.1 x16phoenix 1.4 w/ PhtakAGGRESSION=13 WORKSIZE=128 VECTORS BFI_INT Memory @ 300MHz5870x2 (Ares)8261.1870093532002.4PCI-E 2.1 x16phoenix 1.48 w/ PhatkAGGRESSION=13 WORKSIZE=256 VECTORS BFI_INT FASTLOOP=false, memory @ 319 MHz, Windows 7 32-bit5870x2 (Ares)8780.5851500100032002.1PCI-E 2.1 x16phoenix 1.7 w/ PhtakAGGRESSION=13 WORKSIZE=128 VECTORS BFI_INT Memory @ 300MHz5870x417841.29960-2.1PCI-E 2.0 x1phoenix 1.50 + phatk + Version 2.2 ImprovementCards are clocked with BIOS flash @ 960Mhz Core and 300Mhz Memory. More information and pictures: http://bitcointalk.org/index.php?topic=7216.msg324521#msg3245215870x62568-1200970-2.4PCI-E 2.1 x16poclbm/debian32bit-v -w128, voltage default, Mem downclocked to 300 MHz, Fan 80-90% (+ 4x12cm fun 1900rpm), Temp 6x 70-75C. Whole computer comsumpts 1280Watt. Using PCI-E risers 16x-16x to use 6 GPU cards59705301.8030.53?29472532002.4.595.10PCI-E 2.1 x16poclbm/201103.beta3/Windows-v -w128 -f605970535.061.82029472532002.1PCI-E 2.1 x16clmine59705601.9052947253200-PCI-E 2.1 x16Diablo59705651.92229472532002.1PCI-E 2.1 x16clmine259706042.05429472532002.1PCI-E 2.1 x16clmine59706451.87534485032002.1PCI-E 2.1 x16m0mchil/poclbm 03-07-11-f1, Debian 6, fglrx-driver 10.9.3597073979532002.4PCI-E 2.1 x16cgminer 2.3.1-I 9 -k phatk -w 256 -v 2, memory clock @ 265MHz, Debian Squeeze, fglrx-driver 12.1.1, performance scales linearly with engine clock as long as memory clock is 1/359707402.151134485032002.1PCI-E 2.1 x16phoenix/1.3AGGRESSION=12 WORKSIZE=128 VECTORS BFI_INT, memory clock @ 300MHz59707552.207634284832002.1PCI-E 2.1 x16poclbm 28-04-11-f 1 -w 256 -v, Ubuntu 10.10, fglrx 11.4, memory clock @ 300MHz59708022.3134785032002.4PCI-E 2.1 x16phoenix poclbm Ubuntu 11.04-q 6 -k AGGRESSION=19 WORKSIZE=128 BFI_INT VECTORS, fglrx 11.4, mem clock @ 1000MHz5970820??????91032002.4PCI-E 2.1 x1Phoenix 1.5 Win7AGGRESSION=12 WORKSIZE=256 BFI_INT VECTORS -k phatk, 11.5, Mem @ 300MHz, 1.110v, 3% phatk mod5970822.2--95032002.4PCI-E 2.1 x16phoenix win7-k phatk -q 6 AGGRESSION=20 WORKSIZE=128 BFI_INT VECTORS, but with this increasing difficulty mining becomes pretty pointless5970833--93032002.4PCI-E 2.1 x16phoenix 1.7.5, win7 x64, catalyst 11.7-k phatk AGGRESSION=13 WORKSIZE=256 BFI_INT VECTORS fastloops=false. memory@300mhz, 1.125v, fan 100%, 73C core temp, 95c voltage controllers. it will clock higher but not stable without a voltage increase and i fear for the VRMs5970863.4--95532002.4PCI-E 2.1 x16Diablo - Debian-v 2 -w 256 (XFX Radeon HD 5970 Black Edition)6310M9.8210.54518500802.4Integrated/APUpoclbm-gui -v -w128HP DM1z 18W TDP is shared with the CPU645027.01.5-186251602.4PCI-E 2.0 x16guiminer/poclbm 2011-06-14-v -w128 Sapphire HD6450 1gb ddr3 Ubuntu 11.04 64bit645032.61.918-177258002.4PCI-E 2.0 x16guiminer/Phoenix1.75 Windows 7 x64 (no Aero)-k phatk VECTORS BFI_INT FASTLOOP=false AGGRESSION=11 -v WORKSIZE=64 Dell OEM HD6450 1gb ddr3 passive cooling/no fan 81C645037.8?-178508002.4PCI-E 2.0 x16Phoenix2.0.0 Windows 8 x64-k phatk2 VECTORS BFI_INT FASTLOOP=false AGGRESSION=11 -v WORKSIZE=64 Sapphire HD6450 1GB DDR3 passive cooling/no fan 150MHz memory/1000mV VCore6470M24.1----2.1Integrated/APUguiminer6470M31.0----2.1Integrated/APUphoenix 1.486480G24.1----2.1Integrated/APUphoenix 1.756490M15.21------DiabloMiner GUI v2011-05-22 / Mac OS X 10.6.7Model: MacBookPro8,2 VRAM: 256MB6490M16.2890.70823---PCI-E 2.1 x16poclbm-mod (Mac OS X 10.6.7)MacBook Pro early 20116490M17.18-----PCI-E 2.1 x16phoneix 1.50 with poclbm, Mac OS X 10.6.7MacBook Pro 2,8 VRAM: 256MB. phoenix -k poclbm VECTORS BFI_INT FASTLOOP6490M32.1------guiminer 2011-07-01 with poclbm (Win7-x64)MacBookPro8,2 (WinX64) -v -w128 -f06520G33.8--400320-Integrated/APUguiminer 2011-07-01 with OpenCL (Win7-64bit)-v -w128 on Toshiba L775D-S72226530D40.5--4443202.4FM-1cgminer 2.4.1Integrated/APU A6-3500; Linux; Catalyst 11.11; APP-SDK-v2.4 (595.10)6550D(A8 Onboard)66.2----2.5FM-1guiminer 2011-07-01 with OpenCL (Win7-64bit)-v -w128 -f606550D67.6--6004002.5FM-1guiminer 2011-07-01 with OpenCL (Win7-64bit)-v -w128 -f2657068.01.133606504802.4PCI-E x16guiminer 2011-05-21 with poclbm (Win7-32bit)no extra option for miner . Sapphire 6570 gddr5 512mb657082.11.368606504802.4PCI-E x16guiminer 2011-05-21 with poclbm (Win7-32bit)-v -w128 . Sapphire 6570 gddr5 512mb657086.01.95-446504802.4PCI-E x16guiminer/poclbm 2011-06-14-v -w128 Sapphire Ultimate HD6570 1gb ddr3 Ubuntu 11.04 64bit6570112.0--8604802.7PCI-E 2.0 x16guiminer 2012-02-19/poclbm (Win7-64bit)-v -w128 -f1 . Sapphire 6570 Low Profile gddr3 1024mb6570114.0--8664802.7PCI-E 2.0 x16guiminer 2012-02-19/poclbm (Win7-64bit)-v -f 0 -w128 -a 3 . XFX 6570 Full Profile gddr3 1024mb 64 bit6630M48.80------DiabloMiner GUI v2011-06-18 / Mac OS X 10.7Mac Mini 2011 MC816D/A6630M63.00--6004802.5PCI-E 2.0 x16DiabloMiner WindowsLenovo ThinkPad Edge E320 (card overclocked using Sapphire TRIXX)6670102.20--800--PCI-E 2.1 x16poclbm/Debian sid-v -f 0 -w 1286670104.00-1.0-820--PCI-E 2.1 x16guiminer(poclbm)/Win 7-v -a4 -f15 -d0 -w646670110.00-1.0-850--PCI-E 2.1 x16guiminer(poclbm)/Win 7-v -f 0 -w 128 -q 66670111.771.69-669104802.7PCI-E 2.1 x16Phoenix 1.7.5-k phatk2 BFI_INT AGGRESSION=5 VECTORS WORKSIZE=1286670120.1---9004802.7PCI-E 2.1 x16cgminer 2.7.4kernel: diablo i:10 core: 900 mem: 7506670124.0--669408002.4PCI-E 2.0 x16Phoenix2.0.0 Windows 8 x64-k phatk2 VECTORS BFI_INT FASTLOOP=false AGGRESSION=11 -v WORKSIZE=128 Sapphire HD6670 Ultimate 1GB DDR5 passive cooling/no fan 300MHz memory/1100mV VCore6750142-150700--PCI-E 2.1 x16poclbm-v -w128, Gigabyte SL (passive cooler), watts is TDP, card runs very hot (>90°C)6750167.59--870--PCI-E 2.1 x16guiminer-v -f30 -w1286750172.00--860600-PCI-E 2.1 x16guiminer 2012-02-19/poclbm (Win7-64bit) MSI Afterburner 2.2.3-v -w128 f-20 Sapphire 6570 GDDR3 1024Mb CCC ver. 11.12 OCL 2.56750M41.48--870--PCI-E 2.1 x16diablominer6750M60------diablominer OSX 10.7 WorkSize=1286770180--8501200--guiminer-v -w128 , this was an XFX (OEM) model, GPU @ 850 MHz, mem @ 1200 MHz; I pushed it up to 190 Mhash/s briefly by overclocking, but it crashed the system above that6770202--960800-PCI-E 2.1 x1,x4,x8,x16phoenix 1.48Sapphire 6770 (standard) -q2 -k poclbm DEVICE=0 AGGRESSION=10 VECTORS WORKSIZE=128 BFI_INT FASTLOOP (The PCI-E speed does not affect the mining speed)6770217--960800-PCI-E x16Guiminer with phoenixSapphire 6770 -k phatk VECTORS BFI_INT WORKSIZE=128 FASTLOOP=false AGGRESSION=12 with https://bitcointalk.org/index.php?topic=22965.0 modification6770221--10103002.4PCI-E 2.0 x8Phoenix 1.50MSI 6770 -k phatk PLATFORM=0 DEVICE=0 VECTORS BFI_INT WORKSIZE=256 FASTLOOP=false AGGRESSION=13 3% Stock voltage.6770235--10103002.4PCI-E 2.0 x8Phoenix 1.50Sapphire 6770 -k phatk PLATFORM=0 DEVICE=0 VECTORS BFI_INT WORKSIZE=256 FASTLOOP=false AGGRESSION=13 3% mod https://bitcointalk.org/index.php?topic=22965.0 and AS5 paste on core w/ external 12" fan 50C full load. Stock voltage.6770x2470--10103002.4PCI-E 2.0 x8Phoenix 1.50Sapphire 6770 -k phatk PLATFORM=0 DEVICE=0 VECTORS BFI_INT WORKSIZE=256 FASTLOOP=false AGGRESSION=13 3% mod https://bitcointalk.org/index.php?topic=22965.0 and AS5 paste on core w/ external 12" fan 50C full load. Stock voltage.67902201.467150800--PCI-E 2.1 x16Phoenix 1.48-k phatk BFI_INT FASTLOOP AGGRESSION=12 VECTORS OC'd to 1ghz, underclocked mem to 300, voltage at 117567902191.467150960--PCI-E 2.1 x16guiminer-v -f0 -w128 / GPU OC to 960MHz under Windows7 64bit6850171.591.3511.071277759602.1PCI-E 2.1 x16clmine6850196--850960-PCI-E 2.1 x16poclbm-v -w 128 -f 068502201.236(*)178(*)1000(OC)9602.4RC1PCI-E 2.1 x16poclbm-v -w 128 -f 30 (*: Overclocked wattage calculated here )6850234.8--9409602.4PCI-E 2.1 x16Phoenix 1.3AGGRESSION=8 WORKSIZE=128 VECTORS BFI_INT6850236.0--9409602.4PCI-E 2.1 x16Phoenix 1.4-k phatk AGGRESSION=12 WORKSIZE=128 VECTORS BFI_INT, Core @ 900MHz, Memory @ 300MHz6850244.2--9609602.1PCI-E 2.0 x16poclbm june-2011-v -w 1286850245.1-2009409602.4PCI-E 2.0 x16guiminer (Phoenix)Sapphire 6850 (Memory @1000MHz); Win7 64bit; flags: -k phatk VECTORS BFI_INT FASTLOOP=false AGGRESSION=14 WORKSIZE=12868502501.612(*)-155(*)940 (OC)9602.4PCI-E 2.0 x16AOCLBF 1.74 (Phoenix 1.5**) @Win7/x64XFX 6850 (Memory @840MHz; Vdcc @1.148V; Fan @74%; Temp @70C; System @39C); flags: -k phatk BFI_INT FASTLOOP VECTORS AGGRESSION=11 WORKSIZE=128 (*: Overclocked wattage calculated here / **: Tainted Kernel)6850256.2-1709809602.7PCI-E 2.0 x16phoenix 1.7.5 / Win7 32bit-k phatk -VECTORS BFI_INT AGGRESSION=9, Sapphire VaporX 1GB, mem@250MHz, stock VDDC 1.150V6850262.5--9655252.4PCI-E 2.0 x16guiminer / poclbm-v -f 0 -w 128 (HIS 6850 flashed to HIS 6870 BIOS)6850267.21.67-1010(OC)9602.4PCI-E 2.0 x16guiminer / phoenix 1.50-k phatk VECTORS BFI_INT AGGRESSION=11 worksize=128 FASTLOOP=false6850301.41.67-2.4PCI-E 2.0 x16guiminer / poclbm-v -f 2 -w 128 clock @ 985 mem @ 8906870232.471.5401.221519001120-PCI-E 2.1 x16poclbm -v -w 1286870245--90011202.4PCI-E 2.0 x16ph rising 1.45 phoenix 1.50 phatk 11.5 sdk 2.4HD5xxx+ Fastloop phatk AGGRESSION=106870264.5---9801050-PCI-E 2.1 x16GUIMiner v2011-05-01Stays around 66*C if I keep the side panel off and the room well ventilated. Card is PowerColor branded. Windows 7 Ultimate SP1 with Classic theme. Fan is at 100%. -v -w12868702711.80715094011202.4PCI-E 2.0 x16poclbm -v -w 128Debian 6.0.1 x86_646870277.47--9401120-PCI-E 2.1 x16Phoenix 1.3AGGRESSION=8 WORKSIZE=128 VECTORS BFI_INT68702791.847(?)151(?)90011202.4PCI-E 2.1 x16hashkill-0.2.5 alpha cat 11.4 sdk 2.4-G2 -D stock clocks, debian linux 64bit6870281.71.172 (stock)-98011202.4PCI-E 2.1 x16guiminer-v2011-06-09xfx6870, flags: -v 19 -w 128, win7 32-bit6870293.13-94510502.5PCI-E 2.1 x16Phoenix 1.5 Phatkxfx6870, Catalyst 11.6, 1.5 Phoenix flags: -k phatk FASTLOOP=false DEVICE=0 VECTORS BFI_INT AGGRESSION=13 WORKSIZE=128; http://bitcointalk.org/index.php?topic=25860.0 Kernel Patch; http://bitcointalk.org/index.php?topic=6458.0 Cmd; http://developer.amd.com/tools/gDEBugger/Pages/default.aspx No Crossfire Required; runs faster without crossfire 1% + additional 3% from update6870294-98011202.4PCI-E 2.1 x16phoenix phatkxfx6870, 340MHz memory clock, Catalyst 11.6, flags: BFI_INT VECTORS AGGRESSION=9 WORKSIZE=2566870294-98511002.4PCI-E 2.0 x8DiabloPowercolor branded card, Win 8 x64, -v 1 -w 25668702952.021.6414695011202.4PCI-E 2.1 x16hashkill latest as of 7/6/11 (ubuntu 11.4)hashkill-gpu -p bitcoin user:pass:server -D, mem clock 850, voltage @ 1.175, Fan @ 70%, Temp @ 71C.6870297--100011202.4PCI-E 2.0 x16ph rising 1.62 phoenix 1.50 phatk 11.5 sdk 2.4Vectors HD5xxx+ Fastloop phatk AGGRESSION=11 WORKSIZE=1286870300--94011202.5PCI-E 2.1 x16Phoenix 1.6.2 phatk2xfx6870 Black Edition, 340MHz Memory Clock, Catalyst 11.6, VECTORS BFI_INT AGGRESSION=13 WORKSIZE=128, Debian Linux 64-Bit, Fan @ 50%, Temp @ 75C68703001.72-174103811202.4PCI-E 2.1 x16poclbm windows7x86 cat 11.4-v -w128 -f1 mem clock 360, fan 100% temp 73C6870300.061.830164102011202.4PCI-E 2.1 x16Phoenix 1.4 cat 11.4VECTORS BFI_INT AGGRESSION=8 fastloop mem clock 3446870302--94011202.5PCI-E 2.1 x16cgminer 2.1.2xfx6870 Black Edition, 340MHz Memory Clock, Catalyst 11.6, -w 256 -I 9, Debian Linux 64-Bit, Fan @ 50%, Temp @ 75C68703071.72-1741001/\100111202.4PCI-E 2.1 x16poclbm windows7x86 cat11.8-v -w128 -f5,85°C6870310---10001120PCI-E 2.1 x16cgminer 3.1.0 (Ubuntu Server 12.04 LTS AMD64)intensity=13, vectors=2, worksize=128, kernel=diablo, gpu-engine=1000, gpu-memclock=9006870310---103511202.4PCI-E 2.1 x16phoenix 1.48 phatk 11.5 sdk 2.4BFI_INT VECTORS FASTLOOP=false AGGRESSION=12 WORKSIZE=128, mem clock @ 300MHz, voltage @ 1.3006870310--97511202.4PCI-E 2.1 x16phoenix phatk linuxcoinBFI_INT VECTORS FASTLOOP=false AGGRESSION=13 WORKSIZE=128, mem clock @ 340MHz, core clock @ 970MHz, flashed bios, 72 degrees w/ fan @ 68%, GIGABYTE SOC6870312--9753002.4PCI-E 2.1 x16phoenix 1.50 / phatk / Windows 7 x64 SP1VECTORS BFI_INT AGGRESSION=11 FASTLOOP=false WORKSIZE=256, mem clock @ 300MHz, voltage @ 1.300, Fan @ 45%, Temp @ 62C, MSI 6870 HAWK.6870314--103011202.4PCI-E 2.1 x16phoenix 1.50 / phatk / LinuxVECTORS BFI_INT AGGRESSION=11 FASTLOOP=false WORKSIZE=2566870316--103011202.4PCI-E 2.1 x16guiminer 2011-06-09 using phoenix (Win7-32bit)-k phatk platform=0 device=0 VECTORS BFI_INT AGGRESSION=11 worksize=128 FASTLOOP=false, mem clock @ 228MHz, voltage @ 1.25, Fan @ 40%, Temp @ 73C6870320--16095011202.4PCI-E 2.0 x16Win 7 Ultimate x64 / DiabloMiner / Catalyst 12.1Saphire @ GPU 1030 MHz / MEM 300 Mhz @ Voltage 1.25 @ 80% FAN @ 69 temp @ Flags: -v 2 -w 1286870321--105011202.4PCI-E 2.1 x8aoclbf 1.7 phoenix 1.50 11.6Vectors HD5xxx+ phatk AGGRESSION=13 WORKSIZE=256, Memory=325MHz, Volts=1.3V, Fan~55%, Temps~70C68703221.882170105011202.4PCI-E 2.1 x16phoenix 1.47 phatk 11.5 sdk 2.4BFI_INT VECTORS FASTLOOP=false AGGRESSION=12 WORKSIZE=256, mem clock @ 400MHz6870329--107511202.4PCI-E 2.1 x16phoenix 1.48 phatk 11.5 sdk 2.4BFI_INT VECTORS FASTLOOP=false AGGRESSION=11 WORKSIZE=2566870332-1.74-105011202.4PCI-E 2.1 x16guiminer 2011-06-14 using phoenix (Win7-32bit)-k phatk platform=0 device=0 VECTORS BFI_INT AGGRESSION=13 worksize=128 FASTLOOP=false, mem clock @ 228MHz, voltage @ 1.3, Fan @ 60%, Temp @ 74C, flash and browser hardware acceleration disabled, aero enabled.6870339.25---109011202.6PCI-E 2.1 x16Phoenix 1.7.3 cat 12.1Mem @ 350Mhz Clock @ 1090 Voltage 1.337 fan @ 100 Temp @ 75 diapolo's modified phatk kernel -k phatk_dia platform=0 device=0 VECTORS2 AGGRESSION=11 worksize=64 FASTLOOP=false BFI_INT6870375---100011202.5PCI-E 2.0 x16Win 7 Ultimate 32-bit / Guiminer v2011-07-01 / phoenix 1.5 / phatk2 / Catalyst 11.9XFX / GPU @ 1000 MHz / MEM @ 200 Mhz / Voltage @ 1.187 V / FAN @ 40% / Temp @ 72 C / Flags: -k phatk2 platform=0 device=0 VECTORS BFI_INT AGGRESSION=6 worksize=128 FASTLOOP=false / Using 2 miners with equal settings on 1 GPU6870x2600---9453302.5PCI-E 2.0 x16Ubuntu 12.04 32-bit / Phoenix 2 / phatk2 / Catalyst 11.9XFX / GPU @ 945 MHz / MEM @ 330 Mhz / Voltage @ 1.175 / Config: phatk2 VECTORS4 BFI_INT AGGRESSION=12 worksize=128 FASTLOOP=false GOFFSET=True6870x41150-1.2-90010502.4PCI-E 2.0 x16phoenix 1.7 (Win7-64bit)-k phatk platform=0 device=0-3 VECTORS BFI_INT AGGRESSION=11 worksize=128 FASTLOOP=false6870x41180--14595011202.4PCI-E 2.1 x16poclbm/debian32bit-v -w128, Gigabyte SOC. voltage 1.175 (default), GPU default 950 MHz, Mem downclocked to 300 MHz, Fan 4x100% (+ 2x12cm fun 1300rpm), Temp 4x75C (in summer).6870x41200--15097011202.4PCI-E 2.1 x16poclbm/debian32bit-v -w128, Gigabyte SOC. voltage 1.175 (default), GPU overclocked from 950 to 970 MHz, Mem downclocked to 300 MHz, Fan 4x100% (+ 2x12cm fun 1300rpm), Temp 4x75C (in summer). Unstable with GPU@975 MHz.6930320---96012002.1PCI-E 2.1 x16phoenix 1.75/phatkstock voltage, BFI_INT FASTLOOP VECTORS AGGRESSION=13 WORKSIZE=64. 70C, FAN 80% (HIS brand)6930370---9808552.4PCI-E 2.1 x16cgminer-2.4.1stock voltage (1,160), -I9. 71C, FAN 85% (HIS brand)6930372-1.89(?)-10009002.4PCI-E 2.1 x16phoenix 1.75/poclbmmax stable @ 1200 mV, BFI_INT FASTLOOP VECTORS AGGRESSION=13 WORKSIZE=646930x2700--400~94025602.4PCI-E 2.1 x16Guiminermax stable @ 1100mV mem 300, Fan 80-90%, temp 70-75, -v -w64 -f106950272-0.90-90014082.4PCI-E 2.1 x16phoenix 1.48/poclbmmax stable @ 1150 mV, AGGRESSION = 7, BFI_INT, MSI 69506950291--92014082.4PCI-E 2.1 x16phoenix 1.48/poclbmmax stable @ 1200mV, AGGRESSION = 7, BFI_INT, MSI 69506950295--93014082.4PCI-E 2.1 x16phoenix 1.48/poclbmmax stable @ 1275mV, AGGRESSION = 7, BFI_INT, MSI 695069502951.844(?)160(?)81015362.4.595.0PCI-E 2.1 x16m0mchil/poclbm 03-07-11unlocked shaders, default mem 12506950300--94014082.4PCI-E 2.1 x16phoenix 1.48/poclbmmax stable @ 1300mV, AGGRESSION = 7, BFI_INT, MSI 69506950314--80014082.4.595.0PCI-E 2.1 x16guiminer/poclbm 05-01-11-v -f30 -w128 default mem 1250 Stock Sapphire 6950 1gb69503251.635(?)200(?)88515362.4.595.0PCI-E 2.1 x16m0mchil/poclbm 03-07-11unlocked shaders, default mem 125069503321.95~1.2~170~84014082.5.684.212PCI-E 2.1 x16guiminer/poclbm 2011-06-14-v -w 128 -f 0, WinXP x86, Cat11.6b, desktop on IGP, Sapphire 1GB w/ HW locked BIOS, +40MHz GPU OC, 160W ACP + 5% OC = 170W new estimated ACP69503331.95~1.2~170~84014082.4.650.9PCI-E 2.1 x16guiminer/poclbm 2011-06-14-v -w 128 -f 0, WinXP x86, Cat11.6, desktop on IGP, Sapphire 1GB w/ HW locked BIOS, +40MHz GPU OC, 160W ACP + 5% OC = 170W new estimated ACP69503381.84~-184~86014082.4PCI-E 2.1 x16Phoenix 1.50/poclbm kernelSapphire 2GB card w/ HW locked BIOS; Cat 11.6, Win7 x64; core @ 860MHz & 1087mV (OC + undervolt), mem @ 860MHz; cmd line args: VECTORS BFI_INT AGGRESSION=11 WORKSIZE=128; power and MH/J calculated using Power = C*f*v^2 w/ assumption of 175 W at stock settings w/ 100% GPU util. (not measured)6950340--89514082.4PCI-E 2.1 x16guiminer/poclbm 05-21-11-v -w 128, mem @ 500, 1200 mV, MSI 69506950340--8001536(?)PCI-E 2.1 x16guiminer/poclbm 05-21-11-v -f30 -w128 default mem 1250,Sapphire 6950 1gb, unlocked shaders69503432.14-16084015362.4PCI-E 2.1 x16phoenix 06-27-11VECTORS BFI_INT AGGRESSION=11 WORKSIZE=128 FASTLOOP=false, HIS H695FN2G2M 2GB, mem @ 720, Kill-a-Watt measured69503442.02~1.27~170~84014082.5.684.212PCI-E 2.1 x16poclbm/20110709-v -w 128 -f 0, WinXP x86, Cat11.6b, desktop on IGP, Sapphire 1GB w/ HW locked BIOS, +40MHz GPU OC, 160W ACP + 5% OC = 170W new estimated ACP6950344.4--8001536-PCI-E 2.1 x16guiminer/poclbmPowercolor 6950 @ shadermod on original Bios 6950 / 1000mV 850/730, +20% powertune, Fan @ 60%, -v -w128 -f1.69503491.745(?)200(?)8001408-PCI-E 2.1 x16guiminer/poclbm 05-21-11-v -f30 -w128, xfx 6950 xxx 1gb, locked shaders, core 900, mem 650, 79° C69503511.91~-184~86014082.4PCI-E 2.1 x16GUIminer/poclbm v2011-07-01Sapphire 2GB card w/ HW locked BIOS; Cat 11.6, Win7 x64; core @ 860MHz & 1087mV (OC + undervolt), mem @ 860MHz; cmd line args: -v -w 128 -f 0; (same system as the 338 MH/s result above using Phoenix)6950352.8--8201536-PCI-E 2.1 x16guiminer/poclbmPowercolor 6950 @ shadermod on original Bios 6950 / 1000mV 850/730, +20% powertune, Fan @ 60%, -v -w128 -f1.69503601.8(?)200(?)97015362.4.595.0PCI-E 2.1 x16m0mchil/poclbm 03-07-11unlocked shaders, default mem 12506950360--8701375-PCI-E 2.1 x16guiminer/poclbmflashed with 6970 BIOS, -v -f30 -w1286950365--9251408-PCI-E 2.1 x16guiminer/poclbmstock bios, -v -f0 -w128, MSI twinfrozr III 2GB6950366.4--8501536-PCI-E 2.1 x16guiminer/poclbmPowercolor 6950 @ shadermod on original Bios 6950 / 1000mV 850/730, +20% powertune, Fan @ 60%, -v -w128 -f1.6950381--8501536-PCI-E 2.1 x16cgminer/phatkXFX 6950 2Gb reference @ shadermod on original Bios 6950 / 1100mV 850/1250, +10% powertune, I=5, Fan @ 54% ~3100RPM, temp 73C w128. Windows7x64, Catalyst 13.1 .6950383--9751408-PCI-E 2.1 x16guiminer/poclbmstock bios, -v -f0 -w128, voltage 1.274 @72c MSI twinfrozr III 2GB6950388.4--9001536-PCI-E 2.1 x16guiminer/poclbmPowercolor 6950 @ shadermod on original Bios 6950 / 1000mV 850/730, +20% powertune, Fan @ 60%, -v -w128 -f1.6950389.9--9501408-PCI-E 2.0 x16cgminer 2.3.2/Diablostock bios, -I 9, VRAM @ 820Mhz, fan @ 100%, voltage 1.250v, temp @ 68c, HIS ICE-Q X 2GB, OCed using MSI Afterburner, Windows 7 Professional 64-bit SP 16950400~--8953201536PCI-E 2.1 x16GUIMiner 24th Aug 2011Sapphire HD6950 Shader unlock mod 1408>1536 / +20% Power control, Fan @ 55%, Flags:-v -f2 -w64 -r5.Note this keeps temps under 80oC which is needed for this to be stable.Moderate fan noise.Power use is ~200W.6950403--939685-PCI-E 2.1 x16phoenix-1.50/phatkASUS EAH6950 ((Ref. 6950 Flashed -> 6970)) / +10% overdrive volt., Fan @ 90%, VECTORS BFI_INT WORKSIZE=128 AGGRESSION=13. Overclocked from 880 -> 939 with MSI Aferburner6950408.8--9251536-PCI-E 2.0 x16cgminer 2.12GIGABYTE GV-R695D5-2GD-B @ shadermod on original Bios 6950, mem@625, V=1100mv Fan @ 60%. Windows 7x64, Catalyst 11.96950410.4--9501536-PCI-E 2.1 x16guiminer/poclbmPowercolor 6950 @ shadermod on original Bios 6950 / 1000mV 850/730, +20% powertune, Fan @ 60%, -v -w128 -f1.69504172.085(?)200(?)97515362.4.595.0PCI-E 2.1 x16guiminer/poclbmunlocked shaders, +20% overdrive, mem @ 1250, fan @ 77%, temp 64C, -v -w128, gpu core @ 1145mV6950418.8--9401536-PCI-E 2.1 x16guiminer/poclbmGigabyte OC 1GB, shadermod, voltage locked 1.175, mem 450, -w128 -v -f0, ATI Tray Tool6950425.3--950/8501536-PCI-E 2.1 x16phoenix-1.50/phatk2 (Ubuntu natty)Asus 1GB DirectCU, shadermod on OEM BIOS, OEM 1.1v, AMDOverdriveCtrl for 950 core 850 mem, 20% overdrive, flags VECTORS2 BFI_INT FASTLOOP=false AGGRESSION=13 WORKSIZE=12869504282.14(?)200(?)100015362.4.595.0PCI-E 2.1 x16guiminer/poclbmunlocked shaders, +20% overdrive, mem @ 1250, fan @ 80%, temp 64C, -v -w128, gpu core @ 1160mV69504322.16(?)1.44200(?)100015362.4.595.0PCI-E 2.1 x16guiminer/poclbmunlocked shaders, +20% overdrive, mem @ 520, fan @ 80%, temp 76C, -v -w128 -f 2, gpu core @ 1275mV6950432.4--10001536-PCI-E 2.1 x16guiminer/poclbmPowercolor 6950 @ shadermod on original Bios 6950 / 1000mV 850/730, +20% powertune, Fan @ 60%, -v -w128 -f1.695044099015362.4PCI-E 2.1 x16guiminer/phatkunlocked shaders, mem @ 1375, VGPU 1.21v, Watercooled (MCW60), temp 54C, VECTORS BFI_INT AGGRESSION=11 -k phatk6950454.4--10501536-PCI-E 2.1 x16guiminer/poclbmPowercolor 6950 @ shadermod on original Bios 6950 / 1000mV 850/730, +20% powertune, Fan @ 60%, -v -w128 -f1.6950x2 CF720--400 ~90014082.4.595.0PCI-E 2.1 x16GUIMiner v2011-07-01MSI Afterburner - gpu @ 900 (870 stock), mem @ 900 (1250 stock), temp 69-71C(bottom vga) fan@94% / 77-81C(top vga) fan@99% - 31C enviornment, -v -f 1 -w 128 BFI_INT6950x2 CF731--400~90014082.4.595.0PCI-E 2.1 x16GUIMiner v2011-07-01MSI Afterburner - gpu @ 900 (870 stock), mem @ 900 (1250 stock), temp 68C(bottom vga) fan@90% / 73C(top vga) fan@99% - 28C enviornment, -v -f 1 -w 128 BFI_INT AGGRESSION=136950x31081--86014082.4(?)PCI-E 2.1 x8guiminer/poclbm 07-01Sapphire 2GB stock bios, stock voltage, locked shaders: +20% overdrive, mem@650, fan@95%, temp 94C, -v -f0 -w128, 93c6950x413161.51387084014082.4.595.0PCI-E 2.1 x16m0mchil/poclbm 03-07-11locked shaders, default mem 1250, dual fan 75C typical69703231.4680.9222088015362.3PCI-E 2.1 x16poclbm-w 64, SDK 2.1 not supported on 69xx.69703652.2816088015362.5PCI-E 2.1 x16guiminer/phoenixVECTORS AGGRESSION=9 WORKSIZE=128, fan @ 45%, 61C, 1.0 Vcore, 150 MHz mem, TX650w (84%), reference card6970370--88015362.4PCI-E 2.1 x16guiminer/poclbm-v -w128, fan @ 50%/temp 72C, stock card69703721.691(?)220(?)90015362.4PCI-E 2.1 x16phoenix (svn trunk 05.14.2011)clock 900/1375, VECTORS BFI_INT AGGRESSION=11 WORKSIZE=128, fan 45% (auto) / temp 90C6970380----2.4PCI-E 2.1 x16poclbm-v -w128
export GPU_USE_SYNC_OBJECTS=1 # to reduce poclbm CPU from 100% to 2%69703851.96419690015362.4PCI-E 2.1 x16guiminer/poclbm-v -w128, memory downclocked to 684Mhz, fan @ 70%/temp 81C6970388--90015362.4PCI-E 2.1 x16guiminer/poclbm-v -w128, fan @ 50%/temp 72C, stock voltage of 1.175v6970403--MAX15362.4PCI-E 2.1 x16guiminer/poclbmclock Max/50%+stock, -v -w128, fan= 100%/temp 72C (Note: Overclocked using CCC utility under Windows 7, Clock set to Max value w/ 50% increase to memory and 5% increase to voltage)6970406--95015362.4PCI-E 2.1 x16phoenix 1.50/phatkGPU Overclocked to Max (950MHz) using aticonfig, Memory Underclocked using AMDOverdriveCtrl (850MHz). Temp ~ 82C. VECTORS BFI_INT FASTLOOP=false AGGRESSION=11 WORKSIZE=1286970407--95515362.4PCI-E 2.1 x16poclbm-v -w128, fan 75%/temp 75C, voltage +10%6970414--96015362.4PCI-E 2.1 x16guiminer/poclbm-v -w128, fan @ 53%/temp 73C, stock voltage of 1.175v, high air flow case6970420--97515362.4PCI-E 2.1 x16guiminer/poclbm-v -w128 -f0, clocks 975MHz/685MHz MSI Lightning6970423-1.20-99515362.4PCI-E 2.1 x16phoenix 1.48/poclbmATI Tray Tools, Clocks=995/331.25, WORKSIZE=128 BFI_INT AGGRESSION=11 VECTORS ,68C @ 65% Fan, HAF932 Case6970431---97615362.4PCI-E 2.1 x16phoenix 1.7/phatk2MSI AFTERBURNER, Clocks[976/1000], -k parameters[VECTORS BFI_INT AGGRESSION=11], Temperatures{CARD}[86C@100% Fan]{ROOM}[27C/81F],6970433---97515362.6PCI-E 2.1 x16phoenix 1.6.2/phatkMSI Afterburner 2.2Beta, -k phatk AGGRESSION=11 WORKSIZE=128 VECTORS, GPU 65C@100% Fan, Room 21C6970x2710--900/88015362.2PCI-E 2.1 x16poclbm-w 2566970x2828--94015362.4PCI-E 2.1 x16poclbm-v -w128, fans 74%/82%, temp 74C/82C, powertune +20% (via CCC), memory underclock 825MHz (via MSI Afterburner), with 'Maj' fix6970x31243-1000+91015362.52x16, 1x8phoenix 1.7.0fans 100%, temp 88C/84C/69C, GPU 920/ memory 795/ powertune 20%, ATI 11.11, -k phatk2 VECTORS BFI_INT FASTLOOP=false WORKSIZE=128 AGGRESSION=1369906701.940.8934683030722.4PCI-E 2.1 x16poclbmCatalyst 11.4 source.699070483030722.4PCI-E 2.1 x16Diablo Win7 64bitsCatalyst 11.4, Arguments: -v 2 -w 128 (by Swapper 2011-07-07)69907082.0534683030722.3PCI-E 2.1 x16mrb's hdminerBIOS switch at "default" position 2, see source699074483030722.5PCI-E 2.1 x16Diablo Win7 64bitsCatalyst 11.6b, Arguments: -v 2 -w 128 (by Swapper 2011-07-14)69907461.8241088030722.3PCI-E 2.1 x16mrb's hdminerBIOS switch at "overclocked" position 1, see source6990758--880-2.4-Phoenix with PoclbmCatalyst 11.4, OC switch ON, VECTORS AGGRESSION=12 BFI_INT WORKSIZE=128 FASTLOOP=false69907711.880441088030722.3PCI-E 2.1 x16mrb's hdminerSDK 2.1 not supported on 69xx. Memory clock @ 1280Mhz.69907721.838042090030722.3PCI-E 2.1 x16Phoenix & PoclbmOC switch ON + overclocked to 900 mhz, VECTORS AGGRESSION=12 BFI_INT WORKSIZE=1286990790--90030722.3PCI-E 2.1 x16mrb's hdminerBIOS switch at "overclocked" position 1; with "aticonfig --odsc=900,1260" to further overclock the GPU to 900 MHz and mem to 1260 MHz, see source6990795----2.4Diablo's minerBIOS switch at "overclocked" position 1; On Windows Vista, Clocks set at 955,1250. Power control at 20.

Diablo's args: -w 128 -g 5 -v 2 -f 0

See Also
Is a Crypto Mining Farm Still Profitable in 2024?Mining with NVIDIA GeForce RTX 3060 Laptop GPU3090 Mining is underperforming.Is It Worth Mining On A Laptop? Will It Affect The Overall Lifespan Of My Laptop?

6990802--91530722.3PCI-E 2.1 x16mrb's hdminerBIOS switch at "overclocked" position 1; with "aticonfig --odsc=915,1260" to further overclock the GPU to 915 MHz and mem to 1260 MHz, see source6990835-1.11-890/86030722.4PCI-E 2.1 x16phoenixBIOS switch at "overclocked" position 1; with "aticonfig --adapter=1 --odsc=990,890 and aticonfig --adapter=0 --odsc=960,860" (GPU 0 runs hot). Currently, aticonfig can only underclock RAM to 100mhz below core speed. Command line: phoenix.py -k poclbm VECTORS AGGRESSION=13 WORKSIZE=128 BFI_INT6990852--95530722.5PCI-E 2.1 x16cgminer 2.1.2Memory: 830 Mhz, -v 2 -w 128 -I 9, Watercooled, stock voltage. (2012-02 by Swapper)6990865-1.11-890/86030722.4PCI-E 2.1 x16cgminerBIOS switch at "overclocked" position 1; with core 0 at 990/890 engine/mem, core 1 at 960/860 (runs hot). Watercooled at 65-68C.6990x214361.84877788061442.4PCI-E 2.0 x16 x2guiminer 2011.05.11AUSUM switch set to 1 on both cards; Core left at 880MHz, memory left at 1250MHz; VECTORS AGGRESSION=12 BFI_INT WORKSIZE=1286990x216401.4161200101030722.1PCI-E 2.0 x16 x16phoenix 1.7.0GPU 910MHz, Memory 785MHz, Powertune 20%; VECTORS AGGRESSION=12 BFI_INT WORKSIZE=128 FASTLOOP=false6990x217001.4161200101030722.1PCI-E 2.0 x16 x16guiminer 2011.06.14GPU 1010MHz, Memory 900MHz; -k phatk2 VECTORS BFI_INT FASTLOOP=false WORKSIZE=128 AGGRESSION=136990x217402.1182594030722.1PCI-E 2.0 x16 x16cgminer 2.0.8GPU0+3 930MHz core/805MHz memory, GPU1+2 940MHz core/815MHz memory; BIOS switch factory setting; Cooled with 7C air from outside; -g4 -I9 -k phatk6990x32094--900-2.4PCI-E 2.0 x16 x8 x4poclbmGPU 900MHz, Memory 1250MHz; poclbm.py -f 0 -w 2567750104.15800-PCI-E 2.0 x16phoenixworksize=128 VECTORS FASTLOOP AGGRESSION=10 WORKSIZE=1287750117.15900-PCI-E 2.0 x16phoenixworksize=128 VECTORS FASTLOOP AGGRESSION=10 WORKSIZE=1287750125.5---8305122.6 (10.0.898.1)PCI-E 2.0 x8DiabloMinerGPU: 830MHz, Memory: 1125MHz; -v 1 -w 256 source77501342.661.21508805122.6 (?)PCI-E 2.0 x16cgminer 3.1.0 (Gentoo Linux AMD64)factory-overclocked to 880 MHz; power draw measured with a Kill-a-Watt, intensity=13, vectors=1, worksize=128, kernel=diablo7750136.1---9005122.6 (10.0.898.1)PCI-E 2.0 x8DiabloMinerGPU: 900MHz (CCC locked @ 900), Memory: 800MHz; -v 1 -w 256 source7750140---950512-PCI-E 3.0 x16bfgminer 3.0.0Memory: 900MHz; -I 5 -g 2 -k diablo7770182--8310206402.6PCI-E 2.0 x16poclbmUbuntu 10.04 LTS amd64, GPU: 1020MHz7770213---1150640-PCI-E 2.0 x16poclbmWin7 32bit, Core2Duo, poclbm guiminer7790313---1200896-PCI-E 2.0 x16poclbmSaphire Radeon HD 7790 OC (2 fans & heatpipes) GPU 20% OC @ 1200mhz / TEMP 57C / FAN 36%, Win8 64bit, cgminer, "intensity": "10", "vectors": "1", "worksize": "256", "kernel": "poclbm", "thread-concurrency": "8192",7790325---1300896-PCI-E 2.0 x16poclbmMSI Radeon HD 7790 GPU @ 1300mhz/ MEM @ 750mhz/ FAN @ 83 / TEMP 67C Win7 64bit, athlon x2, poclbm guiminer , -v -w 128 -f 178502871,911,115095010242.6PCI-E 2.0 x16cgminerGPU:950 MEM:800, Linux 64bit, Intensive 14, GPU temp = 60°C, Room temp = 25°C, Fan = 60%7850329--150110010242.6PCI-E 2.0 x16cgminer 2.6.4Linux 64bit GTK+3, GPU temp = 60°C, Room temp = 25°C, Fan = 60%, -v 1 -k poclbm -I 6 --gpu-engine 1100 --gpu-memclock 9507850363---124110242.6PCI-E 2.0 x16GuiminerGPU:1241 MEM:48407870405---110012802.6PCI-E 2.0 x16GuiminerSapphire 7870 OC , GPU: 1100MHz, Mem: 950 Mhz, GPU temp: 65°C, Fan 36% (1377 RPM).7870406---110012802.6PCI-E 2.0 x16cgminerGigabyte GV-R787OC-2GD, GPU: 1200MHz, [cgminer -I 7]7870422---116512802.6PCI-E 2.0 x16cgminerSapphire 7870 1ghz edition, GPU: 1165MHz, [cgminer.exe -d 0 -l 1 -T -I 8]7870460---125012802.7?PCI-E 2.0 x16GuiminerMSI R7870 TFIII/oc, Catalyst 12.11 beta4, 455-460 mhash/s @1250 core, 750 mem, 0% Power limit, 1.218v, Zalman VF3000N = 42C, VRMS = 57C, ambient approx. 17-19C, -v -w128 -f107870 XT4853.091.8726157120012802.8PCI-E 3.0 x16 2.0cgminer7870XT clock/mem - 1200/16007870xt520---120015362.7? lolPCI-E 2.0 x4GuiminerSapphire HD7870xt, Catalyst 12.11 beta 4, 515-520 mhash/s @1200/core 750/mem, 0%PL, 1.17v/stock, Zalman vf3000a @60-62C even though its sandwiched between a 7870 and 5850. xD7950510---98517922.6PCI-E 3.0 x16DiabloWindows 8 x64, Asus P8Z77 WS, i7 3rd Gen, Card is XFX brand, Clock 985Mhz, Mem 1100Mhz, -v 1 -w 2567950512---100017922.6PCI-E 3.0 x8poclbmGPU: 1000MHz, Memory: 850MHz7950550---106017922.8PCI-E 3.0 x16DiabloCore 1060, Mem 800, -v 1 -w 256 Intesity 77950605---115017922.6 (10.0.898.1)PCI-E 3.0 x16DiabloMinerGPU: 1150MHz, Memory: 1375MHz; -v 1 -w 2567970555---92520482.6 (10.0.898.1)PCI-E 2.0 x16DiabloMinerGPU: 925MHz, Memory: 1375MHz; -v 1 -w 2567970640--1070 core/1000 mem20482.6PCI-E 3.0 x16cgminer 2.6.5MSI R7970 Lightning Win7 х64, Catalyst 12.8, GPU 1070 MHz, Memory 1000 MHz, GPU temp = 72°C, Room temp = 28°C, Fan = 57%, cgminer -k diablo -v 1 -w 2567970650--110020482.4PCI-E 2.0 x16 x8 x4DiabloGPU 1100MHz, Memory 600MHz;7970650--110020482.6PCI-E 2.0 x1cgminer 2.4.1Win7 х86, Catalyst 12.3, GPU 1100 MHz, Memory 950 MHz, GPU temp = 68°C, Room temp = 25°C, Fan = 58%, -k poclbm -v 1 -w 1287970674--1130 core/1000 mem20482.6PCI-E 3.0 x16cgminer 2.6.5MSI R7970 Lightning Win7 х64, Catalyst 12.8, GPU 1130 MHz, Memory 1000 MHz, GPU temp = 72°C, Room temp = 28°C, Fan = 57%, cgminer -k diablo -v 1 -w 2567970685--1150 core/1000 mem20482.6PCI-E 3.0 x16cgminer 2.6.5MSI R7970 Lightning Win7 х64, Catalyst 12.8, GPU 1150 MHz, Memory 1000 MHz, GPU temp = 72°C, Room temp = 28°C, Fan = 58%, cgminer -k diablo -v 1 -w 2567970685--117720482.6PCI-E 2.0 x16cgminer 2.3.1Win7, Catalyst 12.3, driver: 2.95, E: 1177, M:685, -k diakgcn -v 2 -w 2567970690---115020482.6 (10.0.898.1)PCI-E 2.0 x16DiabloMinerGPU: 1150MHz, Memory: 1375MHz; -v 1 -w 2567970695---1160(core)/1050(mem)20482.6PCI-E 2.0 x16DiabloMiner (options: -v 1 -w 256)Asus HD7970-DC2T-3GD5 @ 1.17V; Linux Ubuntu 11.10 64 bit; AMD SDK 2.6; Catalyst 12.37970710--120020482.4PCI-E 2.0 x16DiabloMinerGPU 1200MHz, Memory 600MHz; -v 1 -w 2567970714~--121020482.7PCI-E 1.1 x16cgminer 2.7.4MSI HD7970 R7970-2PMD3GD5/OC, core clock - 1210Mhz, memory clock - 685, core voltage (1.149V - MSI Afterburner, ~1.043V - GPU-Z), memory voltage 1.5V, temperature - 75C at mid-day and 65C w/ AC on at 20C, Catalyst 12.8, Windows 8 Release Preview 32-bit, kernel - poclbm, vector - 1, worksize - 64, intensity - 14, fan - 100%7970825-214129020482.4PCI-E 2.0 x16BitminterBitminter beta 1.1.1; GPU 1290MHz, Memory

1375MHz (Trixx = 600); work size 256, "BFI_INT," Device-accessible CPU memory; full watercooled block; power stats from GPU-Z; Driver 11.12

7970x319502.61.7275011002048x3-PCI-E 2.0 x16cgminer 2.7.5Win8, Catalyst 12.8, driver: 8.982.0.0, E: 1100, M:750, kernel: poclbm, worksize: 256, intensity: 9, gpu-threads: 4, refitted Diamond 7970 HSF with new VRM pads to lower VRM temps ~15C. Undervolted each card until crash under load, then raised about 0.015v for stability. Settings using afterburner 2.2.1 with OC unlocked. Visiontek 7970: $370, Sapphire 7970: $360, Diamond 7970: $4007970x320502.411.22850115061442.6PCI-E 2.0 x16cgminer 2.3.1Win7, Catalyst 12.3, driver: 2.95, E: 1150, M:685, -k diakgcn -v 2 -w 256, 850W power consumption measured at the wallFirePro V380069.0--PCI-E 2.0 x16BitMinter ClientFirePro V480079.7--7754002.4PCI-E 2.1 x16GUIMiner v2011-05-01FirePro V870084.8--750800--poclbm-mod.03.24.2011FirePro M580061.4--650---poclbm-mod.03.24.2011UbuntuFirePro M580069.3--6504002.1-GUIMiner v2011-04-26-v -w128, Windows 7 32bitFirePro M595096.7--7259002.5PCI-E 2.0 x16poclbm-v -w128 (Windows 7 64 bit)FirePro V5800119--690800-PCI-E 2.0 x16GUIMiner v2011-05-01Windows 7 32bitFirePro V5800144--690800-PCI-E 2.0 x16GUIMiner v2011-05-01-v -w128 (Windows 7 32bit)FirePro V5800161--780800-PCI-E 2.0 x16GUIMiner v2011-05-01-v -w128 (Windows 7 32bit)FirePro V775035.7---3202.4PCI-E 2.0 x16GUIMiner v2011-05-21Windows 7 64bitFirePro V7800254.85---14402.4PCI-E 2.0 x16Phoenix 1.48 with poclbmDebian SqueezeFirePro M7740 (M97 GL) [DELL]63.0--650-2.1PCIe v2.0 x16GUIMiner v2011-06-14Windows 7 64bit / only SDK2.1 worksFirePro M7820150.0--7008002.1PCI-E 2.1 x16GUIMiner v2011-06-09 / poclbmMemory downclocked to 500 from 1000MHz, 169MH/s@800MHz, 181MH/s@860Mhz (max.), only SDK2.1 works, Windows 7 x86
ModelMhash/sMhash/JWattsClockSPCommentION1.80.0672716poclbm; power consumption incl. CPU8200 mGPU1.2120016128 MB shared memory, "poclbm -w 128 -f 0"8400 GS2.3"poclbm -w 128"8400 GS1.60.0131281238DiabloMiner -w 128 -f 1 source8400M GS2.08500GT2.491816poclbm under GUIMiner8600M GT4.93328600M GT3.8Macbook Pro running Diablo8600GT5.661188328600GT OC7.3160232poclbm -w 128 source8800GT250.2410513008800GT24.50.231051300source8800GT31.10.2961051855Overclocked 715 GPU / 1030 Memory / 1855 Shader; GuiMiner v2011-05-218800GT31.80.3031051836112713 gpu, 1026 memory. win7x86, phoenix 1.48, -k poclbm WORKSIZE=64 AGGRESSION=58800GT34.01051998gpu 756M, mem 1123M, shader 1998M, temp 65C. winXP, phoenix 1.50, -k poclbm WORKSIZE=64 AGGRESSION=6 -- same settings get 32.7 MH/s with aggression 28800GTS16.80.109154source source8800 GTS18.70.1241501200poclbm -w 64 no vectors8800 GTS33.5150OCCUDA mining via GUIminer. Win7 64bit. poclbm -v -w128 -f0. OC'd Core@799MHz, Mem@1080MHz, Shader@1905MHz. Fan 70%, GPU temp @ 66C in comfortable room temp.8800 GTX27.51404phoenix 1.48, poclbm, no vectors, 83C with 50C ambient8800m GTX16.3rpcminer-cuda Win7-649300GE1.57130089300GS1.69140089300/nForce 730i2.151200169400GT3.370.067501400169400M (MacBook)1.900.326700poclbm -f 8 no vectors9500M GS3.295032rpcminer-cuda9500GT6.750.135501400329500GT7.300.13550140032rpcminer-cuda, Overclocked 730 GPU/ 500 Memory / fan 100% 70C solid9500GT7.100.13550176732rpcminer-cuda, Overclocked 707 GPU / 500 Memory / fan 100% 73C steady9600GSO19.880.237841375969600GSO51211.750.131901625489600GT15.660.165951625649600GT Zotac151650649600GT OC18.8<0.198>95198164poclbm -w 128 -f 10 source source9600M GS4.0107532rpcminer-cuda9800GT30.360.28910518001129800GT EE19.70.263751375112rpcminer-cuda9800GT OC29.50.2831051836112poclbm.py, no options. Memory underclocked to 850Mhz, GPU overclocked to 733Mhz9800GTX32.540.23214016881289800GTX+32.60.2321401688128win7x64 275.33 Overclocked to 756/1890/1102 using a CUDA-specific miner (instead of phoenix, yay for ZERO stales!)9800GTX+35.390.25114118361289800GTX+36factory OC ubuntu polclbm.py -w 128 -f 10 -a 10 (DO NOT USE -v)9800GTX+37.230.2661401890128win7x64 275.27 phoenix(1.48) -k poclbm AGGRESSION=3 WORKSIZE=64 (may cause 75%+ stale count, in which case use a CUDA-specific miner instead)9800GTX+40.200.287140835128lowered memory clock higher core, unstable if going higher9800GX257.830.2941972x1289800GX2280.1421972x128sourceG2103.380.11130.5140216G2103.790.12430.5140216poclbm -f 1GT22010.80.0841281360DiabloMiner -w 128 -f 1000 sourceGT23015.50.1619665064(9600GT rebranded one from in a medion pc)GT24019.370.28169134096GT24021.2496poclbm-mod -f 0 -v sourceGT24028.196poclbm -f0 -v (Gainward GT240 1024DDR5 OC core@670/stockmem@1700/shader@1700 - stable; max.temp=73)GT240M9.80.4262355048poclbm -f 0 -w 256GT240 OC25.60.36570176596poclbmGTS25035.390.2441451836128GTS25035.20.2431451836128GTS250 OC370.255145204712837.2 with the following OC: Core: 775MHz, Shader: 1900MHz, Memory: 1200MHzGTX260M22.5500112poclbm 4/28/2011 Asus G71GX runs ~90c without cooling padGTX26035.910.1782021242192GTX260440.2421821242216sourceGTX260c21640.400.2361711242216GTX260c21647.40.2601821348216poclbm -w 256GTX260c21650.001050216m0mchil GPU client, Windows 7 64-bit, x6 @ 3.5ghzGTX260c216 OC52.01461216"poclbm -w 256 -f 1"GTX260c216 OC58.9756/400216Core overclocked, Memory underclocked, Ubuntu 11.04 Classic Session(No Effects) "poclbm -w 256 -f 1"GTX260c216 OC60.11706216Core: 364 MHz, Shaders: 1706 MHz, Memory: 594 MHz, VDDC: 1.1800V. "poclbm-mod -w 256 -f 1"GTX27550.750.2322191404240GTX27558729/1458240poclbm -f 0 -w 256GTX28046.840.1982361296240GTX28064.340.2892451296240phoenix.exe -k poclbm AGGRESSION=6 WORKSIZE=128 (61*C with Accelero XTREME GTX280)GTX28564.81607240GuiMiner - Not sure about wattage yet. Still testing. Card runs around 74 CGTX28553.350.2622041476240GTX29589.780.3112891242480GTX295120.700.4182891242480GUIMiner no oc.GTX295117.300.4062891476490GT 320M (MacBook Air)6.12121248320M (Mac mini 2010)7.00.352045032poclbm no extra options, windows 7 x64GT 325M7.599048rpcminer-cudaGT 325M10.5325/650(mem)/1300(shaders)rpcminer-cuda, 71 degreesGT 325M7.99poclbm -f 0 -w 256GT33021.65poclbm -f 0 -w 256GT 330M7.9748Model: MacBookPro6,2 VRAM: 512MB Software: DiabloMiner GUI v2011-05-22 / Mac OS X 10.6.7GT 330M10.8650MHZ core48Model: MacBookPro6,2 VRAM: 512MB Software: GUIMiner running in Bootcamp v2011-08-24 / Mac OS X 10.6.8.The GPU was OC'd to 650MHZ core clock,mem clock was the lowest it would go in MSI Afterburner.The Bootcamp OS was Windows 7 x64.MBP Mid 2010.GT 330M (Sony Vaio Z)7.80.71 ( 0.3 total)11 (26w total)104548GT 330M (Samsung R480)9.1575(GPU)/1265(shader)VRAM 1024MB. pocblm -vectors --verbose. Windows 7 Ultimate x86GTS 350M (Toshiba A665-3DV)17.01.214141080DiabloMiner-Windows.exeGTS 350M (Toshiba A665-3DV5)20.81350DiabloMiner-Windows.exe, OC'd 550/850/1350 73C stableGTS 360M25.0[toshiba qosmio laptop, ~150-165*F stock fans]GTS 360M (ASUS G60jx)20.0everythins is stock, it cannot sustain. it reaches 90 degrees and freezes.GTS 360M (ASUS G60jx)27.2Shader @ 1720, Memory @ 900stock hardware (clean exhaust fan), Afterburner, 72 deg C StableGT43020.240.41349140096GT44020.4164596rpcminer-cuda -aggression=8; winxp x64 driver 275.33GT53017.90.358501400BitMinter v1.1.2GT520M8.9rpcminer-cuda, got up 2 10.2MH/s OC'edGT525M14.6rpcminer-cudaGT540M16.0rpcminer-cudaGT550M17.08rpcminer-cuda -aggression=8GT610M (ASUS K45V)9.371738 MHz2GB RAM.GT650M (rMBP)17.890016cgminer 2.5.0 on OSX 10.7.4GT650M OC27.4GUIMinerGTS45045.280.4271061566192GTS450 (Sparkle One)40.0poclbcm git Oct 2012GTS45045.280.4271061566192GTX460SE56.390.3761501300288GTX46066.32814336rpcminer-cuda 20110605, Graphics Clock @ 814MHz, Memory @ 1555MHzGTX46068.310.4271601350336GTX460 768MB57.8?1350336rpcminer-cuda -gputhreads=320 -gpugrid=336GTX460 768MB (MSI Cyclone 768D5/OC)75.1?930336rpcminer-cuda on Win7 x64 with ForceWare 275.33. MSI Afterburner set to core: 930MHz, shader: 1850MHz, core voltage: 1.087V, memory: 1600MHz. Runs at 58°C with fan at 75% (ambient 25°C).GTX460 1GB DirectCU72.3??1672336rpcminer-cuda -gputhreads=320 -gpugrid=336GTX460 1GB DirectCU89.5??1000336guiminer GPU:1000mhz MEM:900GTX460 1GB ( evga FPB )71.4----870/1744/1800336guiminer-cuda v2012-02-19 FW290.53 Win7x64GTX460 1GB ( evga )83.10.519160925/1850/900@0.960v336guiminer (phoenix1.75) -k poclbm AGGRESSION=8 FASTLOOP BFI_INT -v WORKSIZE=256 ForceWare 301.42 Win7x64 Runs at 70°C with fan at 100%GTX460 (2 cards)1020.319?320?1350sourceGTX460 (2 cards) OC1270.37434016202x 336rpcminer-cuda -gpugrid=128 -gputhreads=128 ver.20110227GTX460 1GB OC (2x MsiHawksSLI)1580.658240w(used kill a watt)core/shader/ram@vcore 930/1860/1150@1.087v (only vcore raised)2x 336rpcminer-cuda ver.20110227 -gpugrid=320 -gputhreads=320 -aggression=7 Watercooled stable @ 110°F/43°!!!USE ASUS GPU Tweak with GPU-Z (afterburner v2.2.3 wont OC with NVIDIA driver 306.97) I would need gpu bios mod to get more oc/volt. Setting faster ram did increase Mhash/s versus setting ram=core clock.GTX46564.410.3222001215352GTX47081.980.3812151215448GTX47094.71414GTX470103.71520memory @ 418MHz, stable @ 72 deg fan @ 90%, puddinpop rpcminer-cuda -gpugrid=96 -gputhread=128 AGGRESSION=14 GIGABYTE brand card BIOS 70.00.21.00.03GTX470111.90.5202151650448GTX4701151616phoenix 1.46 poclbm VECTORS BFI_INT FASTLOOP AGGRESSION=6GTX470x2121 ea. (130 burst ea.)1700448PuddinPop rpcminer-cuda -gpugrid=96 -gputhreads=128 AGGRESSION=14 (memory 856 Max Temp. 71 deg. F on Water 1.085v+, Stable on Beast 2.0>3 days, no i7 CPU OC, driver 280.26, bios 70.00.21.00.03)GTX480101.280.4052501401480GTX480140.431700480rpcminer-cuda -gpugrid=512 -gputhreads=480GTX480 AMP!Zotac140.11700480rpcminer-cuda -gpugrid=480 -gputhreads=480 (vCore-1050,Core Clock-851, Shader Clock-1702, Memory Clock-2033, t-79°c, Water 43°c, stable temperature and work)GTX550 Ti45.0????EVGA 1GB, WinXP rpcminer, no overclockGTX560 Ti67.70.391701700384standard EVGA 560, no overclockGTX560 Ti740.41170822384MSI 560Ti HAWK; core 822 Mhz clock (no overclock); rpcminer-cuda.exe -aggression=4 -gpugrid=64 -gputhreads=384; temp - 71°C; Win 7 x64GTX560 Ti74.80.411801700384gigabyte 900Mhz clock; -w 512 -vGTX560 Ti810.45180835384Gainward GTX560TI Phantom, default clock, rpcminer-cudaGTX560 Ti85.1----cgminer 2.5.0, linux 32bit, nvidia 295.41, Intensity: 14GTX560 Ti1000.52001000384GFX - MSI 560Ti HAWK; rpcminer-cuda.exe -aggression=8 -gpugrid=64 -gputhreads=384; GPU temp - 68°C; OS - Windows 8 x64 .GTX 560M39.30.3875 W775192source1 source2 Note: Uses the 295.51 Beta DriversGTX560 OC86.7<0.51>1701800384rpcminer-cuda sourceGTX570105.830.4832191464480GTX5701400.639219750480rpcminer-cuda.exe -aggression=10 -gpugrid=480 -gputhreads=960; display driver stops working with aggression=11 under win7 x64 driver 270.61GTX5701570.717219850480rpcminer-cuda.exe -aggression=11 -gpugrid=120 -gputhreads=960GTX570165925480rpcminer-cuda.exe -gpugrid=120 -gputhreads=960; vcore 1.1v; Win7 x64 304.79 Beta; -aggression=11 adds strong lag with minimal increase in hashrate.GTX570160925480rpcminer-cuda.exe -gpugrid=104 -gputhreads=832; No desktop lag, very minimal loss in hashrate compared to much laggier settingsGTX580156.60.6422441544512cgminer 2.11.3 on Win 8-64 with I=6, driver nVidia 314.22GTX580x22x 1460.5982441544512rpcminer-cuda.exe -gpugrid=128 -gputhreads=1024

(aggression levels above the default of 6 not recommended; only a gain of ~3MH/s per card, and heavy lag, GUIMiner v2011-08-24, win7 64bit nVidia 290.36 beta driver)

See Also
What To Mine With Nvidia GeForce RTX 3080 Mining Calculator

GTX590193.1------12152x 512poclbm -v -w 256, WinGTX5902x 121.48------7502x 512GTX670112.001.110012751344EVGA GTX670FTW 2GB / GPU Clock offset +75Mhz with EVGA Precision X / GUIMiner -f 60 / Windows 7 64-Bit. (09-13-2012)GTX680127.312801536Asus GTX 680 2GB DirectCU II: Windows 7 64 bit: Nvidia 310.90 driver: Offset of 186: Runs at a constant 52CGTX680110.0011101536RPCMiner with OpenCL or others. Might crash once mining stops. No Flags and Stock Settings (GPU Boost @ 1110mhz Core) with EVGA GTX 680, latest version of GUIMiner (2012-2-19) and Windows 7 x64.GTX680120.001.210012721536Ufasoft Galaxy 4GB (GPU Clock offset +70Mhz with EVGA Precision X) (2012-7-28) and Windows 7 64-Bit.Quadro FX 5805.70.144011254rpcminer-cuda, Win, -gpugrid=128 -gputhreads=512Quadro FX 770M5.7550032DiabloMiner-Windows.exe BFI_INT FASTLOOP AGGRESSION=6, WinQuadro FX 770M6.3950032DiabloMiner-Windows.exe BFI_INT FASTLOOP AGGRESSION=6 w 64, Win 7x64Quadro FX 880M9.6poclbm/guiminerQuadro FX 1600M60.125062532rpcminer-cuda, WinQuadro FX 180013.6----cgminer 2.5.0, linux 32bit, nvidia 256.44 Intensity: 4Quadro FX 2000M230.39758phoenix 1.48, -k poclbm, VECTORS, AGGRESION=6, Lenovo W520 platformQuadro FX 2800M220.2937560096DiabloMiner, winQuadro FX 3000M28.6----cgminer 2.5.0, linux 32bit, nvidia 295.41 Intensity: 3Quadro FX 3600M360.5147050096Quadro FX 380033.3poclbm/guiminer -f0 -w128Quadro NVS 135M1.050.1108001Quadro NVS 2951.70.07235678phoenixQuadro NVS 3100M3.60.2571460016rpcminer-cuda, Win, CUDA 3.1.1Quadro NVS 4200M10.0810guiminer, Win7-64Quadro 500067.70.445152513352rpcminer-cuda.exe -aggression=7 gpugrid=352 gputhreads=704;Tesla C106052.51296240poclbm, Win7x64Tesla K20134.87062496poclbm, LinuxTesla M205079.81550448DiabloMinerTesla M205094.51550poclbmTesla S1070155.2800 [1]1440 (GT200b)[1]960[1]rpcminer-cuda, Linux, CUDA 3.2, 4 instances (-gpu=0 through -gpu=3)Tesla S2070749.231150[2]1792[2]rpcminer-cuda, Linux, CUDA 4.0, 8 instances (-gpu=0 through -gpu=7)GTX280x2102.7

Might you wish to throttle CPU load a bit, so it doesn't reach 100°C, it can be done with Battle Encoder Shirase to a margin, like, -15% of available CPU cycles.

Often, the best combination to be is to throttle CPU miner to -5% AND set it to least of priority levels, so as not to choke GPU miner up.

ModelnprocsMhash/sMhash/JTDP [W]CPU ClockMhash/s CPUMhash/s GPUGPUGPU ClockSPSoftwareNotes4x Opteron 6174481150.36320W2.2 GHz2.4cpuminer v0.8.1--alg 4way --threads 482x Opteron 617224550.24230W2.1 GHz2.3cgminer v2.7.6--algo 4way -t 242x Opteron 61281632.40.141230W2 GHz32.40.3.19-4wayAthlon XP 2000+20.620.00970W1.67 GHz0.620.3.18/Ubuntusource sourceAthlon 64 3500+11.180.01389W2.54 GHz1.18ufasoft v0.4overclocked (originally 2.2 GHz)Athlon 64 X2 3800+21.730.0365 W2.00 GHz1.73cpuminer (v0.8.1-1-g69529c3)-algo=4wayAthlon 64 X2 4000+21.90.0265W2.1 GHz1.9rpc-minerAthlon 64 X2 4400+2.090.03265W2.3GHz2.090.3.19/Win x64sourceAthlon 64 X2 6000+22.810.02125W3 GHz2.81sourceAthlon 64 X2 6400+ Black Edition22.90.023125W3.2 GHz2.90.3.20.2 BETA/Win 7 x64-4wayAthlon II X2 240e22.710.0645W2.81 GHz2.71bitcoindsourceAthlon II X2 25025.60.0965W3.01GHz5.6bitcoin-miner 0.11Athlon II X4 630410.70.1195W2.8 GHz10.7bitcoin-miner 0.4Opteron 8220 x1616252.8Ghz1.5ufasoft / OpenSuse 64bitrunning default, but had to copy 32bit binaries over to get curl and ufasoft running. might be better when using native 32bit system w/o other users on the machinePhenom II X3 72033.80.0495W2.8 GHz3.80.3.1x/WinXPsourcePhenom X4 9950 BE49.30.07126W2.6 GHz2.32bitcoin-miner 0.13/WinXPNo GPUPhenom II X3 72037.20.0895W2.8 GHz7.2cpu-miner 0.2.1/WinXPsourcePhenom II X4 81045.095W2.8 GHzrpcminer-cpuPhenom II X4 81049.595W2.8 GHzrpcminer-4wayPhenom II X4 810410.595W2.8 GHzufasoft v0.10Phenom II X4 810411.595W2.8 GHzcgminer 1.5.3"cgminer 1.5.3 --algo 4way" on Ubuntu 11.10 alpha 2 (64 bit), built by GCC 4.6.1 with "-O3 -Wall -march=native"Phenom II X4 9554110.09125W3.2 GHz11rpcminer-4wayPhenom II X4 9654120.09140W3.4 GHz11rpcminer-4wayPhenom II X6 1055T615.840.13125W2.82 GHz15.84bitcoindsourcePhenom II X6 1055T623.695W3.50 GHz23.6pooler's cpuminer 2.2.2--algo=sha256dPhenom II X6 1075T621.3125WminerdUbuntu 11.04 amd64 runlevel=1 -algo=4way -threads=6Phenom II X6 1090T618141W3.50 GHz3minerdPhenom II X6 1100T6220.176125W3.82 GHz22bitcoin-minerAciid#bitcoin-devSempron 3000+20.862W1.6 GHz0.8cpuminer--alg 4wayTurion X2 RM-7021.965W2.1 GHz1.9cpuminer--alg 4wayZacate E-3502110.61518W1.6 Ghz1.2319.831HD6310M492 Mhz80poclbm -v -w128 + Ufasoft 0.7stock speedsZacate E-3502121.648 Ghz1.25210.87HD6310M492 Mhz80poclbm -v -w 256 -f 1"autotune" speed with ASUS EFI BIOSOntario C-5026.20.689W1.0 Ghz1.2006.2HD6250M277 Mhz80poclbm -v -w128 -f5 -r5A4-3400223.275W2.4 Ghz23.26350stockGUIminerA8-3850460100WStock60HD6550DStock400poclbm.exe, Win7-32, 4GB RAMAll running at stock speeds, and set to auto in BIOS.A8-3870K495100W (@stock)3.3 Ghz95HD6550D900MHz400phoenix.exe -k phatk VECTORS BFI_INT AGGRESSION=4 WORKSIZE=128, Win7-64, 8GB RAM 1667MHzM/B ASUS F1 A75-M Pro, CPU/GPU BIOS overclockedA10-5800K4105100W3.8 Ghz105HD7660D800MHz384cgminer Intensity=7Linux 64bit (Ubuntu 12.10), AMD-APP-SDK-v2.7-RC-lnx64, stock speeds *not* overclocked
Modelp/tMhash/sMhash/JMhash/s/$ /€ACP [W]ClockVersionCommentARM926EJ-S10.187???1.2 GHzcpuminerSeagate Dockstar ArchLinuxMarvel Feroceon (88FR131)10.1950.224<0.010.87 W1.2 GHzcpuminer git (2011-06-15)Marvell SheevaPlug, Debian, 'c' algoARM1136EJ-S10.11???0.528 GHzcpuminer gitT-Mobile Pulse, inside Debian chroot, 'c' algoARM1176JZ(F)-S10.119???0.412 GHzpooler's cpuminer 2.2iPhone 3G, 'sha256d' algoARM1176JZ(F)-S10.2??3.75W800 Mhzcgminer 2.5.0RaspberryPi Model B, SoC BCM2835, Debian Squezee 19-04-2012, Overclocked Cpu 800mhzCortex-A810.1250.36<0.010.35 W0.6 GHzcpuminer git (2011-03-26)Nokia N900: 'cryptopp'Cortex-A810.20.57<0.010.35 W0.6 GHzcpuminer git (2011-03-26)Nokia N900: 'c' algoCortex-A810.365???0.6 GHzpooler's cpuminerBeagleBoard: 'sha256d' algoCortex-A810.435???0.8 GHzpooler's cpuminer 2.2'sha256d' algoCortex-A810.44???0.8 GHzcpuminer 2.2.3 (-mfpu=neon)EfikaMX (iMX.51), CRUX ARMHF, cpuminer -a sha256dAllWinner A10(A8)10.568??<2.5W1.0 GHzpooler's cpuminer 2.2-a sha256d #Native Lubuntu armhf buildCortex-A920.571.14<0.010.5 W1.0 GHzcpuminer git (2011-03-24)Toshiba AC100, ubuntu, 'c' algoCortex-A921.3???1.2 GHzpooler's cpuminer 2.2.3Samsung Galaxy S II - CFLAGS="-O3 -mfpu=neon"
Modelp/tMhash/sMhash/JMhash / $[1]/€[2]ACP [W]Clock [GHz]VersionCommentPentium III (Coppermine)20.390.008TDP 2× 26.1 W1Ufasoft 0.32 (compiled from source), Debian SqueezesourcePentium III mobile?10.30.014211.070.3.1x/Win2Ksource sourcePentium M 1.6ghz10.41.6minerd (jgarzik's 1.0)cryppto, Windows 7Pentium M 1.6ghz10.621.6Ufasoft 0.20Windows XP ProfessionalPentium M 1.6ghz10.711.6pooler's cpuminer 2.2Gentoo LinuxPentium M 1.73ghz10.51.73minerd (jgarzik's 1.0)cryppto, Windows 7Old Xeon 512k (Dual)2x1/22.03.0cpuminer (v0.8.1-1-g69529c3)HT disabled, algo=4way (twice as fast as the 2nd best algo)Pentium 4 2.0A10.852.0ufasoft-0.4/WinXP-g no -t 2Pentium 4 6301/21.293.0ufasoft 0.23Windows XPPentium Dual-Core E21802/21.752.0rpcminer-cpuWin7-64Pentium Dual-Core E21802/24.12.0cpuminersse2_64Pentium Dual-Core E21802/24.52.0ufasoft v0.11Win7-64Pentium Dual-Core E54002/22.270.03652.7bitcoindsourceCeleron E3302/22.20.03652.50.3.19/Ubuntu10.04sourceCeleron E34002/25.9---2.6Ufasoft v0.13 / GUIMiner v2011-06-14WinXP 32 bit, SSE2, Flags "-g no"Core 2 Quad Q66004/411.00.02/0.061052.40bitcoin-miner 0.10-a 60 -g no -t 4Core 2 Quad Q82004/410.90.06/0.102.33Ufasoft 0.14-g no -l yes -t 4Core 2 Quad Q94004/4110.0460.06/0.07952.66bitcoin-miner 0.10-a 60 -g no -t 4Core 2 Quad Q96504/418.670.05/0.06954.00bitcoin-miner 0.10-a 60 -g no -t 4Core i3 5302/48.310.100.06/0.10803.66Ufasoft 0.7-v -a5 -g no -t 4Core i3 M3502/41.480.04352.27bitcoindsourceCore i3-21002/48.283.1ufasoft v0.20Core i5 M4502/41.80.05351.20.3.17/Win7-54sourceCore i5-6502/45.10.04?0.02/0.033.2cpuminer-0.7-4wayCore i5-7504/4140.06/0.103.2bitcoin-miner 0.11-a 5 -g no -t 4Core i5?4/?6.5client from svnsourceCore i5-24004/44.50.050.02/0.03953.1cpuminer git (2011-01-22)cryptopp_asm32Core i5-24004/4140.150.07/0.09953.1cpuminer git (2011-03-26)sse2_64Core i5-2400S4/416.6652.5pooler's cpuminer 2.2.3Linux Mint 13Core i5 2500K4/420.60.10/0.124.2bitcoin-miner-g noCore i5 2600K4/817.3753.4bitcoin-miner-g no. 75W for the whole System without monitor (MSI Board). CPU underclocked to 3,4Ghz and undervolted to 1,012Vcore. Passive Cooling! 3.6ghz results in 18,4 Mhash/sCore i7 2600K4/818.695 W max.3.4Ufasoft bitcoin-miner 0.20-g no -t 8 CPU @ 3.511Ghz 1.176VCore i7 26004/823.93.4pooler's cpuminer 2.2Ubuntu Linux 11.10Core i7 620M2/41.8882.66RPCMiner GUI v2011-05-22 / Mac OS X 10.6.7Model: MacBookPro6,2 RAM: 4GBCore i7 620M2/46.53.33This is achieved by running RPC 4 way miner in VMware Fusion 4 (running win 7 in the VM) while in Mac OSX / Mac OS X 10.6.8Model: MacBookPro6,2 RAM: 8GB.The CPU appears to turbo boost to 3.33GHz in this way from 2.67GHz when running it in this way.The MBP gets very hot and uses a lot of energy though so watch those temps.It'll throttle after a while unless you keep the air vents clear underneath (ie don't put int in your lap,etc).Core i7 720QM4/87.9?452.8ufasoftstream processors overclocked from 1.6 GHz; Dell Precision M6500, Win7-64, 8GB DDR3Core i7 8204/813.82.8ufasoft-t 8Core i7 9204/819.20.101954.0 (x21)ufasoft-a 5Core i7 9504/85.880.0391503.83 (x23)bitcoin-0.3.20.2 Win7-64Core i7 9504/818.90.1261503.83 (x23)ufasoft v0.4Core i7 980x6/1219.20.151304.4 (x33)cpuminer/Win7-64Core i7 980x6/128.73.9 (x27)0.3.17/Win7-64Core i7 990x6/1233.34.5 (x32)ufasoft/Win2008 R2-64Ram - 12Gb, Rampage III BlackEdition, Water coolingCore i7 2635QM4/82.932.00RPCMiner GUI v2011-05-22 / Mac OS X 10.6.7Model: MacBookPro8,2 RAM: 4GBCore i7 620M2/46.30.18352.66ufasoft v0.4Core i7 2600k4/46.74.00phoenix 0.48Core i7 3770k4/85.24.4Guiminer v2012-12-03Windows 7 x64: -v argument increased Mhash/s from 5.0 to 5.2Core i7 3930k6/1266.64.625 (125 x 37)Ufasoft bitcoin-miner v0.28Windows 7 x64, uses ~190watts: -v argument increased Mhash/s from 36.0 to 66.6Core 2 Duo U760011.11.2minerd (jgarzik's 1.0)cryppto, Windows 7Core 2 Duo E52002/26.20.086722.76Ufasoft/Win7-64TDP is 65W + 7W overclockCore 2 Duo E65501/22.452.33cpuminer 0.7.1 (Linux)--algo=sse2_64Core 2 Duo E68502/26.750.10653.0ufasoft-0.3Core 2 Duo E73002/27.760.11703.33ufasoft-0.3uncertain of overclock; miner optimized for Intel CoreCore 2 Duo E73002/22.520.04652.66bitcoindsourceCore 2 Duo E82002/22.30.035652.66rpcminer-cpuCore 2 Duo E84002/26.90.106653.0ufasoft v0.10windows 7/64bit (-t 2)Core 2 Duo E85001/23.63.16guiminer v2011-06-14windows vista 32bitCore 2 Duo E85002/27.23.16guiminer v2011-06-14windows vista 32bitCore 2 Duo P87002/25.92.53ufasoft v0.21windows 7/64bitCore 2 Duo T54502/22.50.07351.63bitcoin-miner 0.10Ubuntu 11.04Core 2 Duo T55002/24.31.66pooler's cpuminer 2.2Gentoo Linux (amd64)Core 2 Duo T64002/24.20.12352.00cpuminer git (Linux)--algo=sse2_64Core 2 Duo T72502/24.50.13352.00bitcoin-miner 0.13/WinXPNo GPUCore 2 Duo T74502/23.70.10352.13bitcoin-miner 0.10Ubuntu 11.04Core 2 Duo T94002/24.22.53ufasoft v0.13Win7-64Core 2 Extreme X90002/22.372.8rpcminer-cpuWin7-64Core 2 Extreme X90002/26.22.8ufasoft v0.11Win7-64Core 2 Extreme X90002/27.23.2ufasoft v0.11Win7-64 Overclocked from 2.8 GHz to 3.2 GHzXeon 2.82/20.82.8cpuminercryptopp_asm32Xeon 30601/22.030.03652.cpuminer 0.8.1 (Linux)--algo=cryptopp_asm32Xeon Prestonia 2.4 (dual)2x1/22.160.0171302.4ufasoft v0.4Xeon X5355 (dual)2x4/410.130.161202.6bitcoindRoughly the same speed as the "c" algo in cpuminerXeon E3-1230 V2 (quad)4/819.7???3.70cgminer 2.8.3-O2 -march=core-avx-i algo=sse2_64Xeon X5355 (dual)2x4/422.760.091202.6cpuminer (v0.8.1-1-g69529c3)-O2 -march=core2, algo=sse2_64Xeon X5365 (dual)2x4/426.00??3.0cpuminer git (2011-06-15)algo=sse2_64Xeon X56502x6/2428.6???2.67cpuminer 1.0.2--algo 4wayXeon x5680 (dual)2x6/2448???3.33GHzUfasoft 0.29CentOS 6.2 x86_64Xeon x5690 (dual)2x6/2452???3.46GHzUfasoft 0.29CentOS 6.2 x86_64Xeon E5-2690 (dual)2x8/3266??2x135W2.9GHzUfasoft 64-bit 0.31Windows Server 2008R2 x64Xeon E53354/49.350.12802.00ufasoft v0.11Vista-32Xeon E54104/49.8?802.33ufasoft v0.10CentOS 5.5 x64Xeon E54404/87.3?802.66Kiv's poclbm-guiFIXME: Either wrong model # or wrong threads/speed infoXeon E55064/49.6?802.13ufasoft v0.10CentOS 5.5 x64Xeon E55204/86.50.08802.27bitcoindsourceXeon E55304/87.140.09802.4bitcoindsourceXeon E56204/811.2?802.4ufasoft v0.10 -t 4CentOS 5.5 x64 Hyper-Threading is offXeon E5630 (dual)2x4/880.1802.530.3.17/Win7-64sourceXeon E6520 (dual)2x4/824.72.53ufasoft v0.10windows 2008 R2 64bit (-t 16)Xeon E72202/26.3?802.93ufasoft v0.10CentOS 5.5 x64Xeon E7320 (dual)2x21.52.8cgminer v1.2.82x2.8ghz dual core running Ubuntu 11.04 x86 (individual cores get 0.4 MH/s)Xeon E7450 (quad)4x6/24602.40ufasoft v0.13-t 24Xeon E7520 (dual)2x4/1618951.87ufasoft v0.10windows 2008 R2 64bit (-t 16)Xeon W36806/12181303.33cpuminer v1.0.2 --algo=4wayUbuntu 11.04 64bitAtom Z5201/21.2021.7ufasoft 1.18Asus Eee 1101HA with overclocking capabilitiesAtom N2301/20.37541.6rpcminer-cpuAtom N2301/20.24541.6rpcminer-4wayAtom N2301/20.9741.6ufasoft v0.10Atom N2701/21.190.2451.6ufasoft v0.10Atom N4501/21.600.316.52.06ufasoft v0.10Atom N5502/41.971.5ufasoft v0.21Windows 7/64 bitAtom 3302/41.8081.6ufasoft v0.13-t 4Atom D5102/41.001.6cpuminer w cryptopp_asm32debian linux 6.0, headless system, 2 GB RAM, running from usb-flashAtom D5104/42.30.07301.6bitcoin-miner 0.10Ubuntu 11.04 ServerXeon Phi 510060/2401401.053pooler's cpuminer portnative mode
Modelp/tMhash/sMhash/JMhash/s/$ACP [W]ClockVersionCommentCell6210.350.0760W3.2 GHzCellminerSony Playstation 3 (FAT): Needs custom firmware. source source Total power usage of PS3 fat is 120W but only the Cell cpu is active.Cell726.6??60W3.2 GHzCellminerSony Playstation 3 (FAT): Needs custom firmware. source source Running with 7th spu enabled and both ppe cores.Cell6210.70.0735W3.2 GHzcellminerSony Playstation 3 (SLIM): Total power usage of PS3 slim is 70W but only the Cell cpu is active.MIPS10.026???200 MHzcpuminerASUS WL-500G Deluxe Router Running OpenWrtVIA Eden11.30.178W1600 MHzcpuminerVIA Eden w/ padlockPowerPC 7447A10.531420 MHzcpuminerPowerPC 7450 (G4e)11.291670 MHzcgminer 2.0.7PowerBook5,6; Mac OS X 10.5.8; AltivecPowerPC 750 (G3)10.140600 MHzcpumineriBook G3 600 w/ CryptoppIBM POWER4+ 2/way2/10.581450 MHzcpuminer 2.2.3CRUX PPC (64bit), cpuminer -a sha256d -t 1IBM Power7 (PowerPC)7.63.5 GhzcgminerIBM Power7 770, SuSE Linux 11.1, 4 cores, OpenCL, YASM, AltivecGoogle App Engine10.1440WpyminerModified version of pyminer for GAE.Open Shift10.0590Wpyminer
Non-specialized hardware comparison - Bitcoin Wiki (2024)

FAQs

What is the best hardware for Bitcoin mining? ›

The Bitmain Antminer S21 Hyd 335T is the most profitable Bitcoin mining machine currently, followed by the Canaan Avalon Made A1266, and MicroBit Whatsminer M50S. If you want to mine other cryptocurrencies, the Bitmain Antminer KS3, Bitmain Antminer D9, and Bitmain Antminer K7 are all solid choices.

Read On ›
What is the most energy efficient Bitcoin miner? ›

The Dragonmint T1, developed by Halong Mining, is one of the most efficient Bitcoin miners. Boasting a hash rate of 16 TH/s and a power consumption of only 1480 watts, the Dragonmint T1 stands out for its impressive performance and energy efficiency.

Discover More Details ›
How much time does it take to mine 1 Bitcoin? ›

Not a single Bitcoin, but Bitcoin is mined in blocks. One block is 6.25BTC and it takes 10 minutes to mine. Each Bitcoin block takes 10 minutes to mine. This means that in theory, it will take just 10 minutes to mine 1 BTC (as part of the 6.25 BTC reward).

Continue Reading ›
Who sets Bitcoin difficulty? ›

Difficulty levels are usually adjusted automatically by proof-of-work blockchains to compensate for changes in a network's hashrate (the participation level). Generally, the faster a network can generate hashes, the higher the difficulty will be.

See Details ›
What is the best Bitcoin hardware? ›

1. Trezor Safe 3: Considered the best hardware wallet overall, it supports over 8,000 crypto assets and is widely regarded as the safest crypto wallet on the market. 2. Cypherock: Known for its unique backup and recovery method, Cypherock eliminates the risk of a single point of failure.

Find Out More ›
How much Bitcoin can a 3070 mine in a day? ›

You can mine the equivalent of 0.0001 Bitcoin in 12 hours. So to get one whole Bitcoin equivalent you would have to mine for 10,000 days.

Tell Me More ›
How much electricity does 1 Bitcoin miner use? ›

How Much Electricity is Needed to Mine 1 Bitcoin? As a solo miner, an average of 266,000 kilowatt-hours (kWh) of electricity is required to mine a single Bitcoin (BTC). This process would take approximately seven years to complete, demanding a monthly electricity consumption of about 143 kWh.

Show Me More ›
What is the most advanced Bitcoin miner? ›

Prominent Bitcoin mining hardware manufacturer announces the Antminer S21 Pro, a new iteration of its most efficient mining device. Prominent Bitcoin mining hardware manufacturer announces the Antminer S21 Pro, a new iteration of its most efficient mining device.

Explore More ›
What is the quietest Bitcoin miner? ›

What is the quietest Bitcoin miner? Currently, the Bitmain Antminer R4 and the Antminer Slim Edition by D-Central Technologies are among the quietest Bitcoin miners available. Both models are designed with advanced cooling systems that significantly reduce noise levels, making them ideal for home use.

Continue Reading ›
How many GPUs are needed to mine 1 Bitcoin? ›

There is no minimum or limit to the number of GPUs you can use when mining, and can even start with 1. However, if you are into a serious mining business, a rig of 6 GPUs is recommended.

Show Me More ›

Can I mine bitcoin for free? ›

Yes. Libertex provides free Bitcoin mining to its users via a virtual miner. There are no hidden charges or fees to start earning with our virtual Bitcoin miner. Miners may increase their mining speeds and, consequently, mining profit by upgrading their status in our customer loyalty programme.

Read The Full Story ›
How many computers do you need to mine bitcoin? ›

The resources required for mining Bitcoin include: At least one specialized computer (called an Application-specific Integrated Circuit or ASIC miner) designed to compete for and support a particular cryptocurrency. A reliable and inexpensive energy supply. A dependable internet connection.

See Details ›
What is the hardest crypto to mine? ›

Because of its popularity, Bitcoin is one of the most difficult cryptocurrencies to mine profitably. At-home miners often find themselves losing money on equipment and electricity costs while competing with large-scale BTC mining operations.

Get More Info Here ›
Who has the most control over Bitcoin? ›

The person who holds the most bitcoin is believed to be Satoshi Nakamoto, the unknown figure behind its creation. Bitcoin has been a business interest for many years, but following the approval of spot bitcoin ETFs in January 2024, businesses accounted for the most bitcoin held.

Continue Reading ›
Who makes the math problems for Bitcoin? ›

In order to successfully add a block, Bitcoin miners compete to solve extremely complex math problems that require the use of expensive computers and enormous amounts of electricity. To complete the mining process, miners must be first to arrive at the correct or closest answer to the question.

View More ›
What is the hardware requirement for Bitcoin mining? ›

Today, bitcoin mining requires specialized tools, including: Hardware such as GPU (graphics processing unit), SSD for crypto mining, ASIC (application-specific integrated circuit), or the latest FPGA (Field Programmable Gate Array) chips.

View Details ›
How many GPUs to mine 1 Bitcoin? ›

The number of GPUs required to mine 1 Bitcoin depends on several factors, including the specific GPUs being used, their hash rates, power consumption, and the current difficulty of the Bitcoin network. There is no minimum or limit to the number of GPUs you can use when mining, and can even start with 1.

See More ›
What kind of PC do I need to mine Bitcoin? ›

You'll need a PC with a powerful GPU as a minimum, but the reality is to be competitive you'll likely need a dedicated Bitcoin mining rig, also known as an ASIC miner (Application-Specific Integrated Circuit).

Learn More ›
Do you need a powerful CPU for Bitcoin mining? ›

In the context of crypto mining, CPU mining involves using the computer's primary processor to execute the mining software and perform the requisite calculations. While CPU's are less powerful than GPU's and ASIC's, their versatility allows them to mine virtually any coin (in theory).

Discover More Details ›
Top Articles
If I Cancel a Subscription, Will I Get a Refund? [Answered]
10 Keys to Reducing Your Building Costs | A.C.T. Builders
Evil Dead Movies In Order & Timeline
Skyward Houston County
Frederick County Craigslist
Eric Rohan Justin Obituary
Dr Klabzuba Okc
Nikki Catsouras Head Cut In Half
Cinepacks.store
My.doculivery.com/Crowncork
2021 Lexus IS for sale - Richardson, TX - craigslist
Obituary | Shawn Alexander | Russell Funeral Home, Inc.
My.doculivery.com/Crowncork
Troy Athens Cheer Weebly
Pvschools Infinite Campus
Craigslist Alabama Montgomery
Mini Handy 2024: Die besten Mini Smartphones | Purdroid.de
Canvas Nthurston
Curry Ford Accident Today
Rust Belt Revival Auctions
How to Make Ghee - How We Flourish
Foolproof Module 6 Test Answers
Amelia Chase Bank Murder
Jayme's Upscale Resale Abilene Photos
FAQ's - KidCheck
Miles City Montana Craigslist
5 Star Rated Nail Salons Near Me
3 Bedroom 1 Bath House For Sale
De beste uitvaartdiensten die goede rituele diensten aanbieden voor de laatste rituelen
Iban's staff
Police Academy Butler Tech
W B Crumel Funeral Home Obituaries
Quake Awakening Fragments
Weapons Storehouse Nyt Crossword
Bbc Gahuzamiryango Live
Express Employment Sign In
Doordash Promo Code Generator
Great Clips Virginia Center Commons
Achieving and Maintaining 10% Body Fat
Child care centers take steps to avoid COVID-19 shutdowns; some require masks for kids
How To Get To Ultra Space Pixelmon
Rescare Training Online
Movie Hax
Stitch And Angel Tattoo Black And White
Kenwood M-918DAB-H Heim-Audio-Mikrosystem DAB, DAB+, FM 10 W Bluetooth von expert Technomarkt
What Time Do Papa John's Pizza Close
Craigslist Sarasota Free Stuff
Strange World Showtimes Near Atlas Cinemas Great Lakes Stadium 16
Unit 4 + 2 - Concrete and Clay: The Complete Recordings 1964-1969 - Album Review
Mike De Beer Twitter
Minecraft Enchantment Calculator - calculattor.com
Salem witch trials - Hysteria, Accusations, Executions
Latest Posts
Can a Canadian Buy a House in USA - America Mortgages
You could owe taxes on forgiven debt — here's what you need to know
Article information

Author: Pres. Lawanda Wiegand

Last Updated:

Views: 5746

Rating: 4 / 5 (71 voted)

Reviews: 94% of readers found this page helpful

Author information

Name: Pres. Lawanda Wiegand

Birthday: 1993-01-10

Address: Suite 391 6963 Ullrich Shore, Bellefort, WI 01350-7893

Phone: +6806610432415

Job: Dynamic Manufacturing Assistant

Hobby: amateur radio, Taekwondo, Wood carving, Parkour, Skateboarding, Running, Rafting

Introduction: My name is Pres. Lawanda Wiegand, I am a inquisitive, helpful, glamorous, cheerful, open, clever, innocent person who loves writing and wants to share my knowledge and understanding with you.