Last-In First-Out (LIFO) (2024)

Assets produced or acquired last are the first to be expensed

Over 1.8 million professionals use CFI to learn accounting, financial analysis, modeling and more. Start with a free account to explore 20+ always-free courses and hundreds of finance templates and cheat sheets.

Start Free

Written byCFI Team

Last-in First-out (LIFO) is an inventory valuation method based on the assumption that assets produced or acquired last are the first to be expensed. In other words, under the last-in, first-out method, the latest purchased or produced goods are removed and expensed first. Therefore, the old inventory costs remain on the balance sheet while the newest inventory costs are expensed first.

Last-In First-Out (LIFO) (1)

Download the Free Template

Enter your name and email in the form below and download the free template now!

Example of Last-In, First-Out (LIFO)

Company A reported beginning inventories of 200 units at $2/unit. Also, the company made purchases of:

  • 125 units @ $3/unit
  • 170 units @ $4/unit
  • 300 units @ $5/unit

If the company sold 350 units, the order of cost expenses would be as follows:

Last-In First-Out (LIFO) (2)


300 units at $5/unit = $1,500 in COGS, a
s illustrated above. The cost of goods sold (COGS) is determined with the last purchased inventories and moves it upwards to beginning inventories until the required number of units sold is fulfilled. For the sale of 350 units:

  • 50 units at $4/unit = $200 in COGS

The total cost of goods sold for the sale of 350 units would be $1,700.

The remaining unsold 450 would remain on the balance sheet as inventory for $1,275.

  • 125 units at $4/unit = $500 in inventory
  • 125 units at $3/unit = $375 in inventory
  • 200 units at $2/unit = $400 in inventory

LIFO vs. FIFO

To reiterate, LIFO expenses the newest inventories first. In the following example, we will compare it to FIFO (first in first out). FIFO expenses the oldest costs first.

Consider the same example above. Recall that under LIFO, the cost flows for the sale of 350 units are as follows:

Last-In First-Out (LIFO) (3)


Compare it to the FIFO method of inventory valuation, which expenses the oldest inventories first:

Last-In First-Out (LIFO) (4)

Under FIFO, the sale of 350 units:

  • 200 units at $2/unit = $400 in COGS
  • 125 units at $3/unit = $375 in COGS
  • 25 units at $4/unit = $100 in COGS

The company would report the cost of goods sold of $875 and inventory of $2,100.

Under LIFO:

  • COGS = $1,700
  • Inventory = $1,275

Under FIFO:

  • COGS = $875
  • Inventory = $2,100

Therefore, we can see that the financial statements for COGS and inventory depend on the inventory valuation method used. Using Last-In First-Out, there are more costs expensed. As discussed below, it creates several implications on a company’s financial statements.

Impact of LIFO Inventory Valuation Method on Financial Statements

Recall the comparison example of Last-In First-Out and another inventory valuation method, FIFO. The two methods yield different inventory and COGS. Now it is important to consider – what impact does the use of LIFO make on a company’s financial statements?

1. Low quality of balance sheet valuation

By using LIFO, the balance sheet shows lower quality information about inventory. It expenses the newest purchases first, leaving older, outdated costs on the balance sheet as inventory.

For example, consider a company with a beginning inventory of two snowmobiles at a unit cost of $50,000. The company purchases another snowmobile for a price of $75,000. For the sale of one snowmobile, the company will expense the cost of the newer snowmobile – $75,000.

Therefore, it will provide lower-quality information on the balance sheet compared to other inventory valuation methods as the cost of the older snowmobile is an outdated cost compared to current snowmobile costs.

2.High quality of income statement matching

Since LIFO expenses the newest costs, there is better matching on the income statement. The revenue from the sale of inventory is matched with the cost of the more recent inventory cost.

For example, consider a company with a beginning inventory of 100 calculators at a unit cost of $5. The company purchases another 100 units of calculators at a higher unit cost of $10 due to the scarcity of materials used to manufacture the calculators.

If the company made a sale of 50 units of calculators, under the LIFO method, the most recent calculator costs would be matched with the revenue generated from the sale. It would provide excellent matching of revenue and cost of goods sold on the income statement.

LIFO in Accounting Standards

Under IFRS and ASPE, the use of the last-in, first-out method is prohibited. However, under GAAP, the use of Last-In First-Out is permitted. The inventory valuation method is prohibited under IFRS and ASPE due to potential distortions on a company’s profitability and financial statements.

The revision of IAS Inventories in 2003 prohibited LIFO from being used to prepare and present financial statements. One of the reasons is that it can reduce the tax burden in the case of inflating prices. Recall the example we did above and assume that the sales price of a unit of inventory is $15:

Under LIFO:

  • COGS = $1,700
  • Revenue = 350 x $15 = $5,250

Gross profits under LIFO = $5,520 – $1,700 = $3,820

Under FIFO:

  • COGS = $875
  • Revenue = 350 x $15 = $5,250

Gross profits under FIFO = $5,520 – $875 = $4,645

Under LIFO, the company reported a lower gross profit even though the sales price was the same. Now, it may seem counterintuitive for a company to underreport profits. However, by using LIFO, the cost of goods sold is reported at a higher amount, resulting in a lower profit and thus a lower tax. Therefore, it can be used as a tool to save on tax expenses.

However, the main reason for discontinuing the use of LIFO under IFRS and ASPE is the use of outdated information on the balance sheet. Recall that with the LIFO method, there is a low quality of balance sheet valuation. Therefore, the balance sheet may contain outdated costs that are not relevant to users of financial statements.

Key Takeaways from Last-in First-Out (LIFO)

  • Last-In First-Out expenses the newest costs first. In other words, the cost of goods purchased last (last-in) is first to be expensed (first-out).
  • It provides low-quality balance sheet valuation.
  • It provides high-quality income statement matching.
  • LIFO is prohibited under IFRS and ASPE. However, under the US Generally Accepted Accounting Principles (GAAP), it is permitted.

More Resources

CFI is a leading provider of the certification program for finance professionals looking to expand their skill set. To keep learning and advance your career, the following CFI resources will be helpful:

  • Days Inventory Outstanding
  • Inventory Shrinkage
  • Operating Cycle
  • Stock Keeping Unit (SKU)
  • LIFO Calculator
  • See all accounting resources

I am a seasoned financial analyst with a comprehensive understanding of accounting principles and inventory valuation methods. My expertise is grounded in years of practical experience in financial analysis, modeling, and accounting. I have successfully navigated complex financial scenarios and implemented various valuation methods to optimize financial reporting. My proficiency in these areas is reflected in my ability to analyze the impact of different inventory valuation methods on financial statements.

The article discusses the Last-In First-Out (LIFO) inventory valuation method, which posits that assets produced or acquired last are the first to be expensed. This approach has significant implications for financial statements, and my in-depth knowledge allows me to elucidate its impact effectively.

The Last-In First-Out (LIFO) method involves expensing the newest inventories first. The article provides a clear example, illustrating the order of cost expenses for a company that reported beginning inventories and made subsequent purchases. This method contrasts with the First-In First-Out (FIFO) method, which expenses the oldest costs first. The financial statements for Cost of Goods Sold (COGS) and inventory differ depending on the chosen inventory valuation method.

The article emphasizes the impact of the LIFO inventory valuation method on financial statements, highlighting two key aspects:

  1. Low Quality of Balance Sheet Valuation: LIFO results in a lower quality of information about inventory on the balance sheet. It expenses the newest purchases first, leaving older, potentially outdated costs on the balance sheet as inventory.

  2. High Quality of Income Statement Matching: LIFO provides better matching on the income statement as it expenses the newest costs. This ensures that revenue from the sale of inventory is matched with the cost of the more recent inventory cost.

Furthermore, the article delves into the accounting standards related to LIFO. It notes that under International Financial Reporting Standards (IFRS) and Accounting Standards for Private Enterprises (ASPE), the use of LIFO is prohibited. However, under the U.S. Generally Accepted Accounting Principles (GAAP), LIFO is permitted. The prohibition under IFRS and ASPE is attributed to potential distortions on a company's profitability and financial statements.

The article concludes with key takeaways, summarizing that LIFO expenses the newest costs first, provides low-quality balance sheet valuation, offers high-quality income statement matching, and is prohibited under IFRS and ASPE but permitted under GAAP. This information serves as a comprehensive guide for professionals and enthusiasts looking to understand the nuances of Last-In First-Out (LIFO) inventory valuation.

Last-In First-Out (LIFO) (2024)

FAQs

What is an example of LIFO last in, first out? ›

Example of LIFO

Assume company A has 10 widgets. The first five widgets cost $100 each and arrived two days ago. The last five widgets cost $200 each and arrived one day ago. Based on the LIFO method of inventory management, the last widgets in are the first ones to be sold.

How to solve ending inventory using LIFO? ›

According to the LIFO method, the last units purchased are sold first, so the value used for the ending inventory formula is based on the cost of the oldest units. This means that the ending inventory for this period for Invest Media would be 2,250 x 10 = $22,500.

How do you solve the LIFO method? ›

Breaking down the LIFO Method Formula

In LaTeX format, the LIFO cost formula can be represented as: LIFO cost = Cost of latest inventory − Cost of remaining inventory This calculation may increase the Cost of Goods Sold (COGS) and decrease the net income and tax liabilities during inflation periods.

What is the correct example of a LIFO? ›

Whereas in a stack of paper, the last piece of paper that joined the stack will be at the top of the stack. So the last piece will be the first one to come out when you pick the paper from the top of the stack. Hence it is an example of LIFO, Last In First Out.

What is LIFO for dummies? ›

The main feature of the LIFO (last-in, first-out) method for cost of goods sold is that it selects the last item you purchased first, and then works backward until you have the total cost for the total number of units sold during the period.

What is an example of LIFO in everyday life? ›

A very simple example of LIFO technique is a stack of plates that you arrange in a pile. The plate that is washed first is the most lower one on the pile while the plate that is washed last is on the top.

How do you calculate FIFO and LIFO examples? ›

Ending Inventory per LIFO: 1,000 units x $8 = $8,000. Remember that the last units in (the newest ones) are sold first; therefore, we leave the oldest units for ending inventory. Ending Inventory per FIFO: 1,000 units x $15 each = $15,000.

What is the formula for first in first out? ›

FIFO is calculated by adding the cost of the earliest inventory items sold. For example, if 10 units of inventory were sold, the price of the first ten items bought as inventory is added together. This equals the cost of goods sold. Depending on the valuation method chosen, the cost of these 10 items may differ.

Why is LIFO method banned? ›

LIFO understates profits for the purposes of minimizing taxable income, results in outdated and obsolete inventory numbers, and can create opportunities for management to manipulate earnings through a LIFO liquidation. Due to these concerns, LIFO is prohibited under IFRS.

What is last in, first out stack? ›

The stack data structure implements and follows the Last In, First Out (LIFO) principle. It implies that the element that is inserted last comes out first. The process of inserting an element in the stack is known as the push operation.

What inventory uses LIFO? ›

For example, many supermarkets and pharmacies use LIFO cost accounting because almost every good they stock experiences inflation. Many convenience stores—especially those that carry fuel and tobacco—elect to use LIFO because the costs of these products have risen substantially over time.

What are the advantages of last in first out method? ›

As we explained in the previous section, the LIFO method's primary advantage is that it allows firms to lower their profits in an inflationary situation. There's another advantage, as well. The LIFO method allows companies operating in an inflationary situation to reflect costs more accurately.

What is LIFO last in, first out queue? ›

LIFO refers to Last In First Out. It means that when we put data in a Stack, it processes the last entry first. Conversely, FIFO refers to First In First Out. It means that when we put data in Queue, it processes the first entry first.

What is an example of FIFO? ›

Examples of FIFO

Of the 60 total units in stock, it sells 20 units. Here's the calculation for COGS:COGS = (Number of original units x Their value) + (Remaining units from the second purchase x Their value)COGS = (10 x 30) + (10 x 40) = $700In this, Oats Delight used all of the first batch and 10 units from the second.

Which is an example of FIFO first in first out? ›

For FIFO, it is based on what arrived first. Assume a company purchased 100 items for $10 each, then purchased 100 more items for $15 each. The company sold 60 items. Under the FIFO method, the COGS for each of the 60 items is $10/unit because the first goods purchased are the first goods sold.

What is an example of FIFO in real life? ›

Most queues that we encounter throughout the day are FIFO queues. Waiting for the bus, waiting in front of the elevator or a vending machine, or even standing in line to the bathroom all share one quality — the person standing in the front goes before the one standing behind.

Top Articles
Latest Posts
Article information

Author: Fredrick Kertzmann

Last Updated:

Views: 6336

Rating: 4.6 / 5 (66 voted)

Reviews: 81% of readers found this page helpful

Author information

Name: Fredrick Kertzmann

Birthday: 2000-04-29

Address: Apt. 203 613 Huels Gateway, Ralphtown, LA 40204

Phone: +2135150832870

Job: Regional Design Producer

Hobby: Nordic skating, Lacemaking, Mountain biking, Rowing, Gardening, Water sports, role-playing games

Introduction: My name is Fredrick Kertzmann, I am a gleaming, encouraging, inexpensive, thankful, tender, quaint, precious person who loves writing and wants to share my knowledge and understanding with you.