How To Bridge Tokens From Ethereum To Polygon With MetaMask | ConsenSys (2024)

High gas prices can turn off even the most seasoned crypto user. Whether you’re a crypto native or a newcomer, one of the most efficient ways to utilize your assets is to bridge it to a Layer 2 network that inherits the security guarantees of Layer 1 Ethereum.

Why? Low transaction fees, higher throughput, and a better overall user experience. You may even get exposure to certain dapps that aren’t available on Mainnet.

To begin our bridging series, we’d like to start with the first well-structured, easy-to-use platform for Ethereum scaling and infrastructure development: Polygon’s Proof of Stake network (previously Matic).

Solving The Scaling Trilemma

The blockchain trilemma refers to a widely held belief that decentralized networks can only provide two of three benefits at any given time with respect to decentralization, security, and scalability (Gemini).

How To Bridge Tokens From Ethereum To Polygon With MetaMask | ConsenSys (1)

Matic was started as a scaling solution to overcome these obstacles.

Ethereum’s gas fees are untenable for most users and Polygon serves as a solution for the novel crypto user to purchase NFTs, partake in DeFi, and immerse themselves in virtual worlds in an efficient, affordable manner.

Read on to learn how to bridge your assets to the platform using their native bridge and interact with a dapp that will make your environmentally friendly senses tingle. 🌲

Sending Assets To Polygon

First, you’ll want to make sure you have your funds handy in your wallet. MetaMask is your portal into the Web3 world and you can use it directly in your browser extension.

Remember to practice good security with your seed phrase—store it safely, in multiple places, and NEVER give it to anyone.

After you’re done, you can make your way over to Polygon’s bridge and approve the transaction to log into their wallet. It will look like this:

How To Bridge Tokens From Ethereum To Polygon With MetaMask | ConsenSys (2)

Click “Sign” and you will be directed to their bridging portal to transfer your assets from Ethereum Mainnet to Polygon.

How To Bridge Tokens From Ethereum To Polygon With MetaMask | ConsenSys (3)

Simply select which tokens you want to send, and click “Transfer”. It should take about 7-8 minutes to deposit your funds.

How To Bridge Tokens From Ethereum To Polygon With MetaMask | ConsenSys (4)

You will be prompted to sign and approve the transaction in your MetaMask wallet which is where the gas fee will also be quoted, and you will see a progress tab bar indicating when your transfer is complete.

How To Bridge Tokens From Ethereum To Polygon With MetaMask | ConsenSys (5)

Note that the Proof of Stake (PoS) bridge is secured by validators and will take approximately 3 hours when/if you want to move your funds back to Ethereum.

Completed? Your funds are now on Polygon and you’ll be able to interact with a slew of dapps and tools.🕺🏽

How To Bridge Tokens From Ethereum To Polygon With MetaMask | ConsenSys (6)

Check out the extensive list here.

Bridging Carbon Credits To Polygon

*this section originally appeared on James Beck’s article, How We Get To Negative Emissions With Web3

Web3 decentralizes financial primitives and protocols and makes it easier to collectively pool capital and increase liquidity. With smart contracts, rewards can be automated on-chain, in real time, which makes it easier to incentivize participation. Standardized, tradable carbon credits tokens increase liquidity, and because of open source software and the inherent composability of DeFi, projects can build upon other ideas and smart contracts.

One project that just began to standardize carbon credits as tokens is the Toucan Protocol, which built a “carbon bridge” to bring carbon credits to Polygon. Using the Toucan Protocol, anybody can tokenize their carbon offsets on the Verra registry and make them available to DeFi protocols. They plan on expanding to other carbon registries, like the Gold Standard in the future.

Users of the carbon bridge need to retire the carbon offsets in the “real world” before bringing them on-chain in order to guarantee that a carbon token is unique and that burning a token on-chain is equivalent to retiring an offset. Each of their Base Carbon Tonne (BCT) tokens is backed by 1 tonne of a retired CO2 credit.

How To Bridge Tokens From Ethereum To Polygon With MetaMask | ConsenSys (7)

Since launch on October 18th, already 10.8 million tons of CO2 have traversed the carbon bridge from the Verra registry and deposited in the Carbon Pool, BCT (Base Carbon Tonne). Incredibly, this is about 12% of NYC’s annual CO2 emissions.

How To Bridge Tokens From Ethereum To Polygon With MetaMask | ConsenSys (8)

What is driving this rapid retirement of carbon credits? One clue is that members of KlimaDAO are retiring Verra credits and turning it to BCT in order to start earning rewards in a separate DeFi protocol called KlimaDAO.

$KLIMA tokens are fungible and backed by at least 1 Verified Carbon Unit in the KlimaDAO treasury. People can acquire KLIMA by depositing liquidity tokens (KLIMA/BCT and BCT/USDC) to the treasury, or directly from SushiSwap trading pools using the Polygon network. Holders of KLIMA can earn compounding interest on their KLIMA by staking, will have the ability to vote on Klima DAO policy. Staking encourages long-term holding of KLIMA, and allows participants to benefit from the rising price of carbon.

How To Bridge Tokens From Ethereum To Polygon With MetaMask | ConsenSys (9)

BCT Tokens On Polygon

Told you they’d be tingling.🌲

If you want to harness the power of Web3 in climate servitude here’s how to get some BCT tokens on SushiSwap.

How To Bridge Tokens From Ethereum To Polygon With MetaMask | ConsenSys (10)

Once you’re on the Swap tab, make sure your network in the upper bar is selected to Polygon. If you’re on Mainnet, simply switch your network, and approve the transaction in MetaMask.

You can then select which token you would like to swap and click “Approve Transaction”. In this case, we selected WETH.

How To Bridge Tokens From Ethereum To Polygon With MetaMask | ConsenSys (11)

You will have to approve the transaction fee on MetaMask (which will likely be close to $0), and “Confirm Swap” on SushiSwap for the final step:

How To Bridge Tokens From Ethereum To Polygon With MetaMask | ConsenSys (12)

And done! You pay a modest amount in gas fees and contribute to improving voluntary carbon markets. Feel free to continue perusing dapps on Polygon without high transaction costs barring the fun.

Final Thoughts

New users and natives alike don’t enjoy paying an arm and a leg in high gas fees, and as more and more dapps get deployed on Polygon, people may conduct most of their Web3 activity in this ecosystem. Polygon’s Proof of Stake network is more environmentally-friendly than Ethererum’s current Proof of Work chain (soon to change) and allows Ethereum activity to scale in an efficient way. Once your assets are bridged, you can choose to swap and stake tokens, play games, purchase NFTs, and foray more into Web3 with ease.

How To Bridge Tokens From Ethereum To Polygon With MetaMask | ConsenSys (2024)

FAQs

How do you bridge ETH to Polygon on MetaMask? ›

Sending Assets To Polygon

Click “Sign” and you will be directed to their bridging portal to transfer your assets from Ethereum Mainnet to Polygon. Simply select which tokens you want to send, and click “Transfer”. It should take about 7-8 minutes to deposit your funds.

How do you bridge ETH from Ethereum to a Polygon? ›

From Ethereum to Polygon
  1. To connect, first log in to Polygon Web Wallet, then select the wallet you wish to connect to.
  2. Click on Sign under [Signature Request]. ...
  3. To send your tokens from the Ethereum Mainnet to Polygon Network, find the Deposit tab, and then click on the token name (for example, Ether).
Jun 22, 2022

What is the cheapest way to bridge ETH to Polygon? ›

The Polygon Bridge allows users to move tokens from Ethereum ERC20 to Polygon Matic, Polygon's native token, which is the cheapest way to bridge ETH to Polygon.

How do you bridge ETH from ETH to Matic? ›

Click on Move funds to Matic Mainnet.

Click Transfer, then click Continue to move funds from Ethereum to Matic. You'll be shown a transfer overview that shows the total gas required to bridge the token over, click Continue to proceed and follow the instructions on screen.

How do you bridge ERC 20 Matic to a Polygon? ›

Step 1: Setup your MetaMask Wallet to use Polygon
  1. Install or Open Metamask wallet. ...
  2. add the MATIC network into the MetaMask settings. ...
  3. Click Settings tab and add name.
  4. Settings step for Polygon Matic for Metamask wallet[/caption] ...
  5. Add Chain ID. ...
  6. Add Currency Symbol. ...
  7. Click Save to connect to Matic's Mainnet.
Jul 5, 2021

How do I move coins between networks on MetaMask? ›

Here's a recap:
  1. Go to bridge. ...
  2. Connect your MetaMask wallet.
  3. Select the network you want to transfer TO and FROM.
  4. Select the asset you want to transfer.
  5. Click “Swap” and “Confirm Swap” and sign the transactions in MetaMask (and hardware wallet if using) to start the transfer.
  6. Click “Sign to Claim Funds” and voila!

How long does the ETH to Polygon Bridge take? ›

The Proof of Stake Bridge takes around 45 minutes to 3 hours for withdrawal or bridging tokens from Polygon to Ethereum. On the other hand, the Plasma Bridge could take around 7 days to complete the withdrawal. Here are the steps for transferring tokens to Ethereum from Polygon through the Proof of Stake Bridge.

Does it cost to bridge ETH with Polygon? ›

Polygon to Ethereum bridge fees. There is not a set transaction fee for any bring. It varies depending on the bridge itself and the congestion of the blockchain you would like to transfer. Some other different blockchain bridges on the market are xPollinate V2, Narni Bridge, Plasma Bridge, etc.

How long does it take to bridge ETH to MATIC? ›

Here is a tutorial on how to use Matic Bridge in the AlphaWallet app. If you are transferring tokens from Ethereum, you will receive exactly the same number of tokens on Polygon. Usually, it takes up to 5 minutes.

How much does it cost to bridge from Ethereum? ›

When moving assets from Ethereum to Avalanche, the bridge fee is currently $3 worth of the ERC20 asset being transferred.

Can I send MATIC from ETH to Polygon? ›

A Matic token on the Ethereum network and a native Matic token on the Polygon network should not be sent to the same wallet (either both to an Ethereum wallet or both to a Polygon wallet) as they are each minted on different blockchains.

Can you swap networks on MetaMask? ›

You can switch between different blockchain networks while on Polygon quite easily. This guide will show you how to switch between networks on Polygon using the MetaMask wallet. Step 2: Connect a wallet you own by entering your password and clicking “Unlock”.

How do I transfer ERC-20 tokens? ›

Sending ERC20 tokens is very easy with MetaMask. You just need to paste the ERC20 address, ensure that you have enough ETH to cover the transaction fee, and click the “Send” button.

How do I transfer my tokens on a MetaMask? ›

Head to the homepage of your account. From here, tap the 'Send' button. You can also send tokens by clicking on the token itself, displayed under the 'Assets' tab on your homepage. Now you'll need to input the address you want to send to.

How many confirmations does a Polygon bridge have? ›

For more information, please see our Bridged USDC Terms. Circle's platform requires 372 confirmations for transactions on Polygon before marking them as complete, which takes ~20 minutes.

How do I connect to a Polygon network on MetaMask? ›

This process requires the use of the MetaMask browser extension.
  1. Step 1: Open MetaMask Network Settings. Navigate to the Settings tab in MetaMask: ...
  2. Step 2: Add the Polygon Network Details. Click the Add a network button on the network settings page: ...
  3. Step 3: Save the Settings.
Dec 8, 2022

Does ETH on Polygon have gas fees? ›

The reason behind this is the calculation of gas fees since Ethereum is calculated in ETH while Polygon is done in MATIC. Thus, transferring 1 unit of the native currency, even at a low transaction cost of 7 Gwei on Ethereum, can go up to $0.62.

Why are there no gas fees on polygons? ›

NFTically reduces minting prices, removes gas fees on Polygon network to attract more users. Minting non-fungible tokens (NFTs) on the online software-as-a-service (SaaS) platform NFTically will now be free for users but only on the Polygon network, the company said in a statement.

Are Polygon fees cheaper than Ethereum? ›

With gas fees as low as 10 gwei, Ethereum's layer-1 is becoming a bargain deal, even compared with sidechains like Polygon.

Why does transferring ETH cost so much? ›

Because there is limited space in each Ethereum block, the gas fee market is often used to prioritize which transactions will be included in the next block. Each transaction needs a certain amount of computational resources to complete, which requires a gas fee.

How do I avoid Ethereum transaction fees? ›

Ways to Avoid Ethereum Gas Fees
  1. Use DeFi Saver App.
  2. Optimize your Transaction Timings.
  3. Use DApps That Offer Discounts and Rebates.
  4. Utilize Gas Tokens.
  5. Accurate Calculation of Ethereum Gas Fees.
  6. Use a Layer-2 Blockchain.
Jul 7, 2022

How do you unwrap an ETH on a Polygon? ›

Click on the wallet icon in the top-right corner of the screen. Click on the three dots next to your WETH. Click the “Unwrap” option.

Can you send ETH to Polygon network? ›

To send your tokens from the Ethereum mainnet to Polygon, go to the [Deposit] tab. Click on the token name to choose the token to bridge. In this example, we'll use ether (ETH). Enter the amount and click [Transfer].

Can you convert ETH to MATIC? ›

You are free to convert ETH to MATIC on our platform without disclosing your identity. We don't request any private data from you. Setting up a personal account is not mandatory.

How do you bridge an ETH to Matic MetaMask? ›

Bridge assets from ETH > Polygon Chain (MATIC)
  1. 1) Head over to the Matic Web Wallet:
  2. 3) Sign the transaction by clicking the "Sign"button: (it costs nothing)
  3. 4) Once you have connected, you will see the bridging UI of the MATIC PoS bridge:
  4. 5) Use the dropdown to choose the token you want to bridge:

Can I bridge WETH to Polygon? ›

Wait for your cross-chain bridge transaction to Polygon to complete. You will then receive your wrapped ETH (WETH) on Polygon. Please Note: Most cross-chain transfers are completed almost instantaneously, however some may take as long as 20 minutes to complete depending on how much traffic the chain is experiencing.

What is the best Polygon bridge? ›

The SWITCH BRIDGE option near the Transfer Mode option helps in selecting the compatible bridge for the transfer. Generally, the PoS Bridge is the first choice for transferring tokens to Ethereum from Polygon.

How long does it take to bridge ETH to Matic? ›

Here is a tutorial on how to use Matic Bridge in the AlphaWallet app. If you are transferring tokens from Ethereum, you will receive exactly the same number of tokens on Polygon. Usually, it takes up to 5 minutes.

Can I send Matic from ETH to Polygon? ›

A Matic token on the Ethereum network and a native Matic token on the Polygon network should not be sent to the same wallet (either both to an Ethereum wallet or both to a Polygon wallet) as they are each minted on different blockchains.

Does Polygon bridge cost money? ›

Polygon to Ethereum bridge fees. There is not a set transaction fee for any bring. It varies depending on the bridge itself and the congestion of the blockchain you would like to transfer. Some other different blockchain bridges on the market are xPollinate V2, Narni Bridge, Plasma Bridge, etc.

How much does it cost to convert ETH to Polygon? ›

ETH to MATIC Exchange Rate

The current 1 Ethereum to Polygon exchange rate is 1356.6245 MATIC. ChangeNOW is limitless when it comes to crypto-to-crypto exchanges, feel free to swap as many coins as you would like!

Top Articles
Latest Posts
Article information

Author: Tyson Zemlak

Last Updated:

Views: 5765

Rating: 4.2 / 5 (63 voted)

Reviews: 94% of readers found this page helpful

Author information

Name: Tyson Zemlak

Birthday: 1992-03-17

Address: Apt. 662 96191 Quigley Dam, Kubview, MA 42013

Phone: +441678032891

Job: Community-Services Orchestrator

Hobby: Coffee roasting, Calligraphy, Metalworking, Fashion, Vehicle restoration, Shopping, Photography

Introduction: My name is Tyson Zemlak, I am a excited, light, sparkling, super, open, fair, magnificent person who loves writing and wants to share my knowledge and understanding with you.