As a laundromat owner you know there is nothing more frustrating than having a coin jammed in one of your machines. Whether the cause of the jam is a damaged coin or a worn out slide mechanism, remedying the problem can be easy if you know how to take the machine apart to get to the stuck coin. If you need a new or used vended dryer or vended commercial washer in Charleston, SC, make the call to T & L Laundry Equipment for big savings.
Ideally, a stuck coin should dislodge from the chute with a press of the coin return button. However, when that doesn't do the trick, there are a few tried and true things you can try to get that coin to move before you take the assembly apart.
- Put another coin into the slot and attempt to use this action to dislodge the stuck coin.
- Slap the side of the machine where the coin slot is located to get the coin to move.
- Place a piece of wood or something to protect the finish of the machine and tap on the wood with a hammer to unjam the coin. Use caution not to hammerso hard that you cause damage to the machine. A gentle vibration may loosen the coin.
- If the coin has tipped inside the coin slot, the coin slot may not move. Using a utility knife to push the coin upright may allow it to pass through normally.
- Attempt to pull the coin out of the slot with tweezers.
If the coinslide, rather than the coin, is the issue you may need to disassemble the coin acceptor. Follow these steps to correct the issue:
- Remove the coin store tray and empty it. Check to see if anything is blocking the coin shoot inside.
- Take off the maintenance panel on the top face of the coin slide housing. The panel is usually locked in the back with a key.
- Remove the long bolt that runs from the maintenance panel to the front of the housing.
- Disconnect any wiring from the slot mechanism and carefully free the mechanism from the housing.
The offending coin or debris should be able to be clearly seen at this point. Once you have cleared the slot, test the mechanism with a fresh coin before you reassemblethemechanism.
It is important to note the placement of any nuts, screws, connections, or other parts as you disassemble the coin slide. If the problem continues, the mechanism may need to be replaced. The good news is that since you know how to remove it, you can replace it.
Affordable Commercial Washer in Charleston, SC
If you feel uncertain about taking this mechanism apart or need genuine manufacturer's replacement parts, give T & L Laundry Equipment a call. For more than40 years we have provided vended and commercial laundry owners with exceptional service and support. Let our expert staff help you get the right vended dryer or commercial washer in Charleston, SC.
We proudly offer full product lines from some of the top manufacturers in the industry like Speed Queen and Continental. Known for their reliability and durability, these manufacturers lead the industry in technology and innovations that bring exciting innovations for owners and customers.
Ready to learn more about how T & Laundry Equipment can help you improve your business through the latest equipment, planned maintenance agreements and timely service? Make an appointment with a member of our sales team today and put our40 years of industry experience to work for you!
Image Rights: www.chiefappliance.com
FAQs
Place a piece of wood or something to protect the finish of the machine and tap on the wood with a hammer to unjam the coin. Use caution not to hammer so hard that you cause damage to the machine. A gentle vibration may loosen the coin. If the coin has tipped inside the coin slot, the coin slot may not move.
How do you move a commercial washer? ›
How to Move a Washing Machine
- Unplug washer, open door, let dry for 24 hours.
- Turn off water supply.
- Disconnect hoses.
- Secure the tub.
- Clean and dry outside of machine.
- Tape door shut.
- Cover with moving blanket.
- Move using dolly.
A displaced or faulty spin switch is the most likely cause. This small switch should be pressed down by the lid when it's closed. If it isn't pressed down, your machine may prevent the spin cycle as a safety measure. To troubleshoot this, hold the switch down with your finger (with the lid open) and start a spin cycle.
How much does a large commercial washer cost? ›
Maytag commercial washers: $900 to $2,200. Speed Queen commercial washers: $900 to $2,600. Whirlpool commercial washers: $800 to $1,800.
Why is my washing machine jammed? ›
The most common cause is water left in the machine. Try running a spin/drain cycle. If this fails, the machine can be drained by placing the washing machine drain hose lower than the drum (into a bucket or tray). The door interlock has simply jammed.
How do you unblock a washer? ›
Use a funnel to pour about a quarter of a cup of baking soda into the pipe. Next, empty a baster full of vinegar into the drain hose. Top tip: If the blockage is not completely gone, you can repeat the above process. Once you have cleared any debris from the hose, pour hot water in to flush everything out.
Can you move a washing machine yourself? ›
Even with multiple people around, a washing machine is still a dangerous and challenging household appliance to move by lifting only. You'll be able to find an appliance dolly for a reasonable price at a local home appliance store, or you could consider renting one from your removal company.
Can I lay a washer down to move it? ›
When you move your washer, first replace the shipping bolts that were originally in the back of the washer. This keeps the drum from moving inside the washer and protects it from damage. Also, make sure your washer is placed in the moving van upright. Shipping your washer on its side, front, or back can damage it.
Can you move a washing machine on your own? ›
If you are only moving your washing machine from one room to another, wheel it to its new destination. If that new destination happens to be up or down some stairs, you cannot continue moving the machine on your own. Ideally, you should be working with a removal expert who has a stair dolly.
How do you fix a washing machine that won t agitate or spin? ›
If a washer won't spin or agitate, a broken suspension spring could be making the tub unbalanced and unable to rotate properly. Inspect the suspension springs for damage and replace if necessary - it is recommended that all springs be replaced at the same time for more even wear.
In general, commercial washers and dryers are designed to last longer than their residential counterparts, with a lifespan ranging from 10 to 15 years on average. With regular maintenance, some machines will even last 20 years or more.
Can I buy a commercial washer for my home? ›
Heavy loads are no problem with commercial-grade residential washing machines, built to make your life easier. With a commercial-grade washer, you can wash bulky, heavy-duty loads with ease.
Why are commercial washers so expensive? ›
Because commercial washers and dryers are designed for continuous use, they're more expensive than domestic machines. But even though domestic machines cost less, they're more expensive in the long run. There's no warranty for a domestic washer or dryer if used in a commercial environment.
Why is my coin operated washer not draining? ›
Check the Drain Hose or Pump for Clogs
It's common for a sock or other small piece of clothing to get into the drain system and clog the hose or pump. Remove the front panel of the washer and check for any obstructions in these areas. If you find anything, remove it to see if you can get the washing machine to drain.
Can a coin block a washing machine? ›
“[Coins] can damage the fins on the drain pump if they make it past the filter,” says James Peters, Kenmore Laundry Product Manager. “Emptying pockets is the solution.” They could also get stuck in a drain pipe and block it so the water doesn't drain or they might even shatter the glass of a front-loading washer.
Where is the coin trap in my washer? ›
Locate the lower panel below the washer door. Some washers have a small door in the lower right or left corner of the front panel to access the coin trap. That's a plastic tray with holes in it that catches coins and other small items before they contact the drain impeller.
As a laundromat owner you know there is nothing more frustrating than having a coin jammed in one of your machines. Whether the cause of the jam is a damaged coin or a worn out slide mechanism, remedying the problem can be easy if you know how to take the machine apart to get to the stuck coin. If you need a new or used vended dryer or vended commercial washer in Charleston, SC, make the call to T & L Laundry Equipment for big savings. 