Performance Leaders pages spotlight stocks that show significant movement in regards to their Percent Change, Price Change, Range Change, or Gap change.
Percent Change
Ranks stocks by the highest and lowest Percent Change (the percentage difference between the current price and the previous close). These pages can help you identify the stocks with the most price movement from the close of the market yesterday.
The Percent Change page differs from theRange Advances and Declines, where Range Change is calculated based on Today's Open Price.
"Make This My Default Page"
Logged in users have the option to select a tab (Advances or Declines), select any timeframe and view, then save that page as the default page to open next time you come to the Highs/Lows page.
What's Included
For U.S. Markets: The initial page displayed is for "All US Exchanges" (includes only NYSE, NYSE Arca and NASDAQ stocks, and does not include ETFs, unit investment trusts, closed end funds, warrant stocks, preferred securities and any non-SIC classified stock).
To be included in the page, a stock has to be trading between $2 and $10,000 (for Canada, the stock has to be trading between $0.25 and $10,000) and have daily volume above 1,000 shares. OTC US stocks have to be trading above $0.25 and have a daily volume above 1,000. Calculations are adjusted for stock splits but not dividend distributions.
Time Frames
The Performance Pages allow you to select from a number of time frames using the drop-down list on the table's toolbar. The Performance for "Today" uses the current session's intraday data, with the list being updated every 10 minutes throughout the trading day. However, new stocks are not automatically added to or re-ranked on the page until the site performs its 10-minute update.
For all other time periods, the information is updated at approximately 7P CT each trading day and will list stocks that have made or matched the criteria for the page during the trading session just closed.
For Performance other than Today, the data is based on either end-of-day, weekly, or monthly data.
- 5-Day - uses end-of-day data.
- 1-Month - uses end-of-day data.
- 3-Month - uses end-of-day data.
- 6-Month - uses end-of-day data.
- 52-Week - usesg end-of-day data.
- YTD - uses end-of-day data.
- 2-Year - uses end-of-day data.
- 3-Year - uses weekly data.
- 5-Year - uses weekly data.
- 10-Year - uses monthly data.
Additional Filters
Additional filtering based on Market Cap, Price, and Volume are available on certain performance pages for U.S. and Canadian Markets. For the U.S. Market, the Price listings are limited to stocks trading on the NYSE, Nasdaq and NYSE Arca exchanges, and does not include ETFs, unit investment trusts, closed end funds, warrant stocks, preferred securities and any non-SIC classified stock.
Market Cap
- Large Cap - stocks with a market cap greater than or equal to $5B
- Mid Cap - stocks with a market cap greater than or equal to $1B and less than $5B
- Small Cap - stocks with a market cap greater than or equal to 250M and less than $1B
- Micro Cap - stocks with a market cap less than 250M
Price and Volume Filter
- Price < $10
- Price > $10
- Volume < 500,000
- Volume > 500,000
Screen
Available only with a Barchart Plus or Premier Membership, you can base a Stock Screener off the symbols currently on the page. This lets you add additional filters to further narrow down the list of candidates.
Example:
- Click "Screen" on the page and the Stock Screener opens, pulling in the symbols from the Performance Leaders page.
- Add additional criteria in the Screener, such as "20-Day Moving Average is greater than the Last Price", or "Trend Seeker® Opinion is Buy".
- View the results and save them to a Watchlist, or save the Screener to run again at a later date.
- Running a Saved Screener at a later date will always present a new list of results. Your Saved Screener will always start with the most current set of symbols found on the Performance Leaders page before applying your custom filters and displaying new results.
Data Updates
For pages showing Intraday views, we use the current session's data with new price data appear on the page as indicated by a "flash". Stocks: 15 minute delay (Cboe BZX data for U.S. equities is real-time), ET. Volume reflects consolidated markets. Futures and Forex: 10 or 15 minute delay, CT.
The list of symbols included on the page is updated every 10 minutes throughout the trading day. However, new stocks are not automatically added to or re-ranked on the page until the site performs its 10-minute update.
For reference, we include the date and timestamp of when the list was last updated at the top right of the page.
Page Sort
Pages are initially sorted in a specific order (depending on the data presented). You can re-sort the page by clicking on any of the column headings in the table.
Views
Most data tables can be analyzed using "Views." A View simply presents the symbols on the page with a different set of columns. Site members can also display the page using Custom Views.
Each View has a "Links" column on the far right to access a symbol's Quote Overview, Chart, Options Quotes (when available), Barchart Opinion, and Technical Analysis page. Standard Views found throughout the site include:
- Main View: Symbol, Name, Last Price, Change, Percent Change, High, Low, Volume, and Time of Last Trade.
- Technical View: Symbol, Name, Last Price, Today's Opinion, 20-Day Relative Strength, 20-Day Historic Volatility, 20-Day Average Volume, 52-Week High and 52-Week Low.
- Performance View: Symbol, Name, Last Price, Weighted Alpha, YTD Percent Change, 1-Month, 3-Month and 1-Year Percent Change.
- Fundamental View: Available only on equity pages, shows Symbol, Name, Market Cap, P/E Ratio (trailing 12 months). Earnings Per Share (trailing 12 months), Net Income, Beta, Annual Dividend, and Dividend Yield.
Note: For all markets except U.S. equities, fundamental data is not licensed for downloading. Your .csv file will show "N/L" for "not licensed" when downloading from a Canadian, UK, Australian, or European stocks page. - Mini-Chart View: Available for Barchart Plus and Premier Members, this view displays 12 small charts per page for the symbols shown in the data table. You may change the bar type and time frame for the Mini-Charts as you scroll through the page. The default settings for Mini-Charts are found in your Site Preferences, under "Overview Charts".
- Pre-Post Market Data: Available for Barchart Plus and Premier Members, this view will show any pre- or post-market price activity for U.S. equities only.
View Symbol More Data (+)
Unique to Barchart.com, data tables contain an option that allows you to see more data for the symbol without leaving the page. Click the "+" icon in the first column (on the left) to view more data for the selected symbol. Scroll through widgets of the different content available for the symbol. Click on any of the widgets to go to the full page. The "More Data" widgets are also available from the Links column of the right side of the data table.
Horizontal Scroll on Wide Tables
Especially when using a custom view, you may find that the number of columns chosen exceeds the available space to show all the data. In this case, the table must be horizontally scrolled (left to right) to view all of the information. To do this, you can either scroll to the bottom of the table and use the table's scrollbar, or you can scroll the table using your browser's built-in scroll:
- Left-click with your mouse anywhere on the table.
- Use your keyboard's left and right arrows to scroll the table.
- Repeat this anywhere as you move through the table to enable horizontal scrolling.
Flipcharts
Also unique to Barchart, Flipcharts allow you to scroll through all the symbols on the table in a chart view. While viewing Flipcharts, you can apply a custom chart template, further customizing the way you can analyze the symbols. Flipcharts are a free tool available to Site Members.
Note: Flipcharts, unlike the full-page chart or Dashboard, does not stream updated data to the chart.
Download
Download is a free tool available to Site Members. This tool will download a .csv file for the View being displayed. For dynamically-generated tables (such as a Stock or ETF Screener) where you see more than 1000 rows of data, the download will be limited to only the first 1000 records on the table. For other static pages (such as the Russell 3000 Components list) all rows will be downloaded.
Free members are limited to 1 site download per day. Barchart Plus Members have 10 downloads per day, while Barchart Premier Members may download up to 250 .csv files per day.
Note: Due to licensing restrictions, Canadian fundamental data cannot be downloaded from Barchart.com. You will see "N/L" in a downloaded column when this is the case.
Should you require more than 250 downloads per day, please contact Barchart Sales at 866-333-7587 or email solutions@barchart.com for more information or additional options about historical market data.
